We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Stainless steel cam and groove adapter plug with hose shank

Usa Sealing

Usa Sealing BULK-CGF-319 Cam and Groove Adapter 6 in 304 SS

SKU CH-RDPD-JFKNF

A 6-inch Type E cam-and-groove plug in 304 stainless steel with a male hose shank rated to 75 psi at 70 °F

  • ColorTransparent
  • TypePipes, Valves & Fittings
  • 304 stainless steel body resists corrosion in demanding fluid transfer
  • Type E cam and groove design enables quick, secure hose connections
  • 6-inch coupling fits 6-inch hose I.D. for full-flow compatibility
  • Male hose shank connection simplifies installation on existing hose assemblies
  • Rated 75 psi maximum working pressure at 70 F for reliable service

Industrial Cam and Groove Adapter

This 304 stainless steel Type E adapter provides a secure hose-shank connection for six-inch industrial hose assemblies. The plug body is machined from corrosion-resistant alloy and rated for a maximum working pressure of 75 psi at 70 F. Overall length measures 7 13/16 inches with a plug outside diameter of 6 15/16 inches.

Suited for permanent hose installations

Installers who need a rigid male hose shank without a locking arm will find this fitting matches the 6-inch coupling size exactly. Operators requiring a quick-disconnect cam lever or a threaded end connection should select a different adapter style.

75 psi pressure rating at 70 F

This single figure defines the safe operating envelope for water, chemical or suction lines. Systems that exceed this pressure or run at higher temperatures must use a higher-rated fitting.

Highlights

  • 304 stainless steel body resists corrosion in demanding fluid transfer
  • Type E cam and groove design enables quick, secure hose connections
  • 6-inch coupling fits 6-inch hose I.D. for full-flow compatibility
  • Male hose shank connection simplifies installation on existing hose assemblies
  • Rated 75 psi maximum working pressure at 70 F for reliable service

Specifications

BrandUSA INDUSTRIALS
ColorTransparent
TypePipes, Valves & Fittings

Questions about this item

Does the 304 stainless steel body heat up or make noise when fluid runs through it all day?

The adapter is a passive 304 stainless steel fitting with no moving parts, so it generates no noise and negligible heat during continuous flow.

What hose or pipe must I already have for this 6-inch Type E adapter to connect?

You need a 6-inch inside-diameter hose with a matching cam-and-groove coupler so the male hose shank on this plug can seat and lock.

Will this 6-inch plug work with older 6-inch cam-and-groove couplers I already own?

Yes, it follows the standard Type E profile, so it fits any 6-inch cam-and-groove coupler of the same size regardless of age.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.