We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Stainless steel cam-and-groove coupler with 1 in NPT thread

Usa Sealing

Usa Sealing 304SS Cam and Groove Fitting D 1 in Coupler x 1 in Bathware

SKU CH-JW5J-ZFFNV

304 stainless steel cam-and-groove Type D coupler with 1 in FNPT thread and 1 in hose fitting, rated 250 psi at 70 °F, 59 mm overall length, nitrile gasket, no locking arm

  • ColorTransparent
  • TypePipes, Valves & Fittings
  • 304 stainless steel body resists corrosion
  • Type D cam and groove design enables quick hose connection
  • 1 inch NPT thread fits standard piping
  • 250 psi working pressure at 70 °F handles demanding flow
  • 59 mm overall length suits compact installations

USA INDUSTRIALS 304SS Cam Groove Coupling

This USA INDUSTRIALS coupling uses 304 stainless steel for a Type D cam and groove socket. It connects a 1 in female NPT thread to a 1 in hose fitting. The body measures 59 mm in overall length with a socket inside diameter of 1 7/16 in. A nitrile gasket seals the joint.

Suits NPT pipe to hose connections

Installers joining 1 in NPT pipe to 1 in hose will find the correct thread and barb size here. The 250 psi rating at 70 F covers many water and air lines. Buyers needing a built-in locking arm or a different gasket material should look at other fittings.

250 psi maximum working pressure at 70 F

The pressure rating of 250 psi at 70 F is the key figure for deciding if this coupler matches the system design. Exceeding this limit risks leaks or failure. Verify the operating pressure and temperature before installation.

Highlights

  • 304 stainless steel body resists corrosion
  • Type D cam and groove design enables quick hose connection
  • 1 inch NPT thread fits standard piping
  • 250 psi working pressure at 70 °F handles demanding flow
  • 59 mm overall length suits compact installations

Specifications

BrandUSA INDUSTRIALS
ColorTransparent
TypePipes, Valves & Fittings

Questions about this item

How hot does the 304 stainless steel cam and groove fitting get when running at 250 psi continuously?

The fitting is rated for a maximum working pressure of 250 psi at 70 F ambient temperature; the metal itself does not generate heat, so its temperature will match the fluid and surrounding environment.

Does the 1 in NPT thread on this Type D coupler require any special tools or sealant to install?

The coupler uses a standard 1 in -11-1/2 NPT thread; you will need a compatible 1 in male NPT fitting, thread sealant or tape, and a suitable wrench for the 1 7/16 in socket diameter.

Will this 1 in 304SS cam and groove coupler connect directly to older brass or iron NPT pipe threads?

Yes, the 1 in NPT female thread follows the same 11-1/2 threads per inch standard used on legacy brass or iron pipe, so it threads on directly without adapters.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.