We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Stainless steel cam and groove coupler with NPT threads

Usa Sealing

USA INDUSTRIALS BULK-CGF-277 Cam and Groove Fitting 304SS B 3/4" Coupler

SKU CH-R5D2-9ZZA6

304 stainless steel Type B cam-and-groove coupler with 3/4 inch NPT threads and nitrile gasket rated to 150 psi at 70 F

  • ColorTransparent
  • TypePipes, Valves & Fittings
  • 304 stainless steel body resists corrosion
  • Type B coupler with 3/4 inch NPT male thread
  • 150 psi working pressure at 70 °F
  • Nitrile gasket provides reliable sealing
  • 2 mm overall length for compact installations

Application fit

The USA INDUSTRIALS BULK-CGF-277 is a cam and groove coupler built for fluid-transfer lines that require 304 stainless-steel construction. It suits maintenance crews and plant operators who need a quick-disconnect socket on a 3/4-inch male NPT thread.

Critical spec

The coupling is rated for a maximum working pressure of 150 psi at 70 degrees Fahrenheit, which determines whether the fitting matches the system pressure envelope. Exceeding that limit risks seal failure and unsafe operation.

Build integration

The socket accepts a 3/4-inch hose shank and seals with a nitrile gasket, while the 52.2 mm overall length keeps the assembly compact. No locking arm is included, so the installer must provide a separate safety clip or pin if the application demands positive retention.

Highlights

  • 304 stainless steel body resists corrosion
  • Type B coupler with 3/4 inch NPT male thread
  • 150 psi working pressure at 70 °F
  • Nitrile gasket provides reliable sealing
  • 2 mm overall length for compact installations

Specifications

BrandUSA INDUSTRIALS
ColorTransparent
TypePipes, Valves & Fittings

Questions about this item

What does the 150 psi rating mean when the fitting is installed in a system?

It indicates the maximum working pressure at 70 °F; the fitting can handle up to 150 psi under those conditions.

How does the NPT thread standard affect compatibility with other components?

The 3/4 in -14 NPT male thread seals on tapered pipe threads, so it mates with matching NPT female ports without adapters.

What clearance is needed to fit the 52.2 mm overall length into an assembly?

The coupler measures 52.2 mm end to end, so allow at least that much straight run plus room for the cam arms to operate.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.