We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Stainless steel cam-and-groove fitting, 1-inch adapter, silver metal finish

Usa Sealing

USA INDUSTRIALS 322 Cam and Groove Fitting 304SS F 1in Adapter x 1in

SKU CH-7GTB-JXQHS

A 304 stainless steel Type F cam-and-groove adapter connects a 1-inch male NPT thread to a 1-inch hose fitting at 250 psi

  • ColorTransparent
  • TypePipes, Valves & Fittings
  • 304 stainless steel body resists corrosion
  • Type F cam-and-groove adapter connects 1-inch NPT threads
  • Rated for 250 psi maximum working pressure at 70 °F
  • Compact 2 3/8-inch overall length fits tight installations
  • Locking-arm-free design allows quick coupling and uncoupling

Industrial Cam-and-Groove Adapter

The USA INDUSTRIALS 322 is a Type F cam-and-groove adapter made from 304 stainless steel. It provides a 1-inch male NPT thread on one side and a 1-inch hose shank on the other. This fitting suits plant maintenance crews and fluid-system installers who need a quick, tool-free connection for water, chemicals or light oils. It is not for systems requiring a locking arm or a pressure rating above 250 psi.

Pressure Capacity and Limits

The adapter is rated for a maximum working pressure of 250 psi at 70 °F. This headroom covers most low-pressure transfer and wash-down duties in food, beverage and general chemical service. The 304 stainless body resists corrosion from many common fluids but is not intended for high-temperature steam or highly aggressive acids that exceed the material’s limits.

Installation Fit and Clearance

The fitting has an overall length of 2 3/8 inches and a plug outside diameter of 1 7/16 inches, so it sits compactly in tight pipe runs. The 1-inch NPT thread mates with standard female ports, while the 1-inch hose barb accepts common push-on or clamped hose. No locking arm is included, so the coupler half must supply the cam leverage to secure the joint.

Highlights

  • 304 stainless steel body resists corrosion
  • Type F cam-and-groove adapter connects 1-inch NPT threads
  • Rated for 250 psi maximum working pressure at 70 °F
  • Compact 2 3/8-inch overall length fits tight installations
  • Locking-arm-free design allows quick coupling and uncoupling

Specifications

BrandUSA INDUSTRIALS
ColorTransparent
TypePipes, Valves & Fittings

Questions about this item

Will the 1 in -11-1/2 NPT threads on this 304SS adapter mate with the existing 1 in NPT plumbing I am keeping?

The adapter has a 1 in -11-1/2 NPT male thread that matches standard 1 in NPT female fittings, so it will thread directly into your existing 1 in NPT plumbing.

How can I confirm the cam-and-groove connection is sealed correctly at the 250 psi rating once installed?

After locking the cam arms, pressurise the line to the 250 psi working pressure at 70 F and check the joint for leaks; a dry joint confirms the seal is holding.

Does the 322 fitting come with a gasket and locking arms, or must I source them separately?

The supplied fitting includes the 304 stainless steel body only; the cam-lock arms and the sealing gasket are not included and must be purchased separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.