US Cargo Control
US Cargo Control SPAS34 3/4" Galvanized Screw Pin Anchor Shackle
3/4-inch galvanized screw-pin anchor shackle for lifting and pulling tasks
- Galvanised coating resists corrosion for outdoor use
- 3/4 inch screw pin suits standard rigging points
- Anchor shackle shape handles multi-directional loads
- Imported manufacture keeps cost competitive
- Proposition 65 notice informs safe handling practice
Galvanized Screw Pin Anchor Shackle
This 3/4 inch galvanized screw pin anchor shackle from US Cargo Control is built for lifting, pulling and conveying tasks. The hot-dip galvanised finish protects the forged steel body against corrosion in outdoor and marine environments. A threaded screw pin allows quick attachment and removal without special tools. It suits riggers, tow operators and general industrial users who need a reliable connection point.
Sustained Load Behaviour
Under continuous tension the galvanised coating resists surface degradation better than painted or bare alternatives. The screw pin remains secure when subjected to vibration because the threads engage fully through the shackle ears. Regular inspection of the pin and body for wear or deformation is still required by standard rigging practice. The design does not incorporate a locking nut, so the pin can back out if not tightened before each use.
3/4 Inch Nominal Size
The 3/4 inch designation defines the shackle body diameter and determines the working load limit for which the part is rated. Buyers who need a larger or smaller diameter must select a different model because the pin and ears are not interchangeable across sizes. This single dimension decides whether the shackle matches the chain, wire rope or synthetic sling in the assembly.
Highlights
- Galvanised coating resists corrosion for outdoor use
- 3/4 inch screw pin suits standard rigging points
- Anchor shackle shape handles multi-directional loads
- Imported manufacture keeps cost competitive
- Proposition 65 notice informs safe handling practice
Specifications
| Brand | US CARGO CONTROL |
|---|
Questions about this item
Does the galvanized finish on this 3/4" shackle resist heat buildup during long lifts?
The galvanized coating protects against corrosion but does not change the metal's thermal properties; heat dissipation depends on the steel body and the load duration.
What pin diameter or thread type must my existing rigging hardware match for this screw pin anchor shackle?
The shackle uses a 3/4" screw pin; mating components must accept that pin diameter and the standard anchor shackle thread profile.
Can I mix this import shackle with older domestic-rated anchor shackles in the same lifting assembly?
Mixing is possible only if every component meets the same working load limit and design standard; verify the ratings on the older shackles before combining them.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
