US Cargo Control
US Cargo Control MWRC916-10PK 9/16" Zinc Plated Malleable Wire Rope Clip 10 Pack
Pack of ten zinc-plated malleable clips for securing 9/16" wire rope ends
- Zinc plated malleable iron resists corrosion for long outdoor life
- 9/16 inch size matches common wire rope diameters
- Ten clips in one pack covers multiple rigging points
- Malleable construction absorbs shock without brittle fracture
- California Prop 65 warning informs safe handling practices
Wire rope clips for 9/16" line
These zinc plated malleable clips come in a pack of ten for securing wire rope ends in lifting and rigging tasks. Each clip uses a U-bolt saddle and two nuts to form a loop or eye termination. The set suits workshops, farms and transport operations that need multiple terminations on the same diameter rope. The hardware meets general purpose rigging requirements for the stated size.
Sustained load behaviour
Under continuous tension the malleable iron body distributes clamping force across the rope without the brittleness of cast alternatives. The zinc plating resists surface corrosion during outdoor exposure and repeated tightening cycles. Proper torque on both nuts maintains grip as the rope settles, reducing the chance of slippage over time. Regular inspection of the saddle and U-bolt threads is advised for critical lifts.
9/16 inch rope diameter fit
The single specification that decides suitability is the 9/16 inch wire rope diameter marked on the clip. Using this clip on larger or smaller rope will not provide the rated holding capacity and can cause premature failure. Buyers who work with different rope sizes must select clips matched to each specific diameter. No other dimension or rating overrides this requirement.
Highlights
- Zinc plated malleable iron resists corrosion for long outdoor life
- 9/16 inch size matches common wire rope diameters
- Ten clips in one pack covers multiple rigging points
- Malleable construction absorbs shock without brittle fracture
- California Prop 65 warning informs safe handling practices
Specifications
| Brand | US CARGO CONTROL |
|---|
Questions about this item
Will the zinc-plated finish on the MWRC916-10PK clips withstand daily heat and vibration without loosening?
The zinc plating resists corrosion and the malleable iron body handles vibration, so the clips stay tight during long runs.
What wire rope diameter do I need on hand before installing these 9/16" clips?
You need 9/16 inch diameter wire rope; the clips are sized specifically for that thickness.
Can I mix these new clips with older unplated clips on the same cable assembly?
Mixing plated and unplated clips is not recommended because different surface finishes can create uneven grip and accelerated wear.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
