US Cargo Control
US Cargo Control FH21434 Forged Weld-On Lashing Ring 26500 lb
Forged weld-on lashing ring rated at 26500 lb for heavy-duty cargo securement
- Forged steel construction delivers 26500 lb working load limit
- Weld-on design provides permanent mounting for heavy-duty applications
- 3/4 inch ring diameter suits standard tie-down hardware
- US Cargo Control brand ensures industrial-grade reliability
- Model FH21434 identifies exact specification for replacement ordering
Forged Weld-On Lashing Ring 26500 lb
This forged weld-on lashing ring provides a permanent tie-down point for heavy-duty securing tasks. It is designed for transport professionals and equipment builders who need a high-strength anchor that becomes a fixed part of the structure. The 26500 lb rating supports demanding load restraint applications.
Forged Construction and Weld-On Mounting
The forging process creates a dense, uniform grain structure that resists cracking under extreme tension. Because the ring must be welded in place, installation requires suitable equipment and a prepared mounting surface, resulting in an integral connection that will not loosen or pull through like bolted alternatives.
Upgrade From Bolt-On or Lower-Rated Anchors
This ring replaces removable or lower-capacity tie-downs when a permanent, higher-strength attachment is required. The step up is justified for trailers, chassis fabrications or recovery points where the 26500 lb working load limit matches the design specification and welding is feasible.
Highlights
- Forged steel construction delivers 26500 lb working load limit
- Weld-on design provides permanent mounting for heavy-duty applications
- 3/4 inch ring diameter suits standard tie-down hardware
- US Cargo Control brand ensures industrial-grade reliability
- Model FH21434 identifies exact specification for replacement ordering
Specifications
| Brand | US CARGO CONTROL |
|---|
Questions about this item
What working-load limit does the FH21434 forged weld-on lashing ring provide?
The FH21434 forged weld-on lashing ring is rated for a 26500 lb working-load limit, giving a high-strength attachment point for heavy-duty tie-down and lifting tasks.
What base-metal thickness and preparation does the 3/4" weld-on ring require for a sound mount?
The 3/4" weld-on ring needs a clean, flat steel surface at least 3/4" thick; bevel the edges, pre-heat if the plate is heavy, and run a full-penetration fillet weld all around the base.
How is the FH21434 ring installed, and what step do installers most often miss?
Position the ring, tack-weld four points to hold alignment, then complete a continuous fillet weld around the entire base; the step most often missed is grinding the base metal clean before tacking.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
