US Cargo Control
US Cargo Control Eye Bolt 12 in Shank 2 in ID Steel Galvanized
Galvanised steel eye bolt with a 12 inch shank and 2 inch inside diameter for secure lifting and rigging
- TypeScrews & Bolts
- 12 inch shank provides deep anchoring
- 2 inch eye diameter accepts thick rope or chain
- galvanised steel resists corrosion in outdoor use
- new condition ensures full rated strength
- California Proposition 65 warning included for compliance
Heavy-duty eye bolt for rigging and lifting
The US Cargo Control galvanised steel eye bolt has a 12 in shank and a 2 in inside diameter. It is made for securing loads, anchoring tie-downs and general rigging tasks where a forged eye is required. The one-inch thread diameter matches standard hardware for a solid connection.
Galvanised coating resists corrosion in outdoor use
The hot-dip galvanised finish protects the steel from moisture and road salt during normal exposure. No moving parts mean silent operation and no power draw. California Proposition 65 notice applies because the coating contains a listed chemical.
One-inch thread diameter decides fit
Buyers must confirm that the mating nut, tapped hole or mounting plate accepts a one-inch thread. The 12 in shank length and 2 in eye ID are fixed, so the bolt cannot suit applications needing a shorter reach or a larger eye.
Highlights
- 12 inch shank provides deep anchoring
- 2 inch eye diameter accepts thick rope or chain
- galvanised steel resists corrosion in outdoor use
- new condition ensures full rated strength
- California Proposition 65 warning included for compliance
Specifications
| Brand | US CARGO CONTROL |
|---|---|
| Type | Screws & Bolts |
Questions about this item
How do I install the 12 in shank eye bolt and what step is often missed?
Drill a clearance hole matching the 1 in thread diameter, thread the full 12 in shank through, and secure with a washer and nut; the step often missed is tightening the nut to the recommended torque so the eye cannot rotate under load.
What maintenance or replacement will the galvanized steel eye bolt need over time?
Inspect the galvanized coating regularly for white rust or flaking; if corrosion reaches the base steel or the 2 in inside diameter shows elongation, replace the bolt.
What limit appears first when the eye bolt is used continuously under tension?
The 2 in inside diameter will begin to deform before the 12 in shank yields, so watch for ovality in the eye as the first sign of overload.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
