US Cargo Control
US Cargo Control BTAS58 Bolt Type Anchor Shackle 5/8" Steel 3.25
Bolt-type anchor shackle with a 5/8 inch steel body and 3.25 ton working load limit
- Bolt-type pin stays secure under vibration
- 5/8 inch steel body resists deformation
- 25 ton working load limit for heavy lifts
- Import-grade construction meets industrial rigging needs
- California Proposition 65 warning included for compliance
Bolt-Type Anchor Shackle 5/8
The US Cargo Control BTAS58 is a bolt-type anchor shackle manufactured from steel with a 5/8 inch size and a 3.25 ton working load limit. It is designed for lifting, pulling and conveying tasks where a secure, removable pin is required. The shackle arrives new and ships directly from the manufacturer.
Rigging Professionals Needing Secure Pin Retention
This shackle suits riggers and operators who prefer a bolt, nut and cotter pin arrangement that resists vibration loosening during repeated load cycles. Buyers who need a quick-release screw pin for frequent attachment changes should consider a different pin style. The product carries a California Proposition 65 warning for a listed chemical.
3.25 Ton Working Load Limit for Overhead Loads
The 3.25 ton rating provides capacity for typical overhead lifting, towing and tie-down applications within its rated limit. It runs out when the applied load exceeds the marked working load limit or when the connection geometry introduces side loading beyond the shackle's design envelope. Always inspect before use and follow applicable rigging standards.
Highlights
- Bolt-type pin stays secure under vibration
- 5/8 inch steel body resists deformation
- 25 ton working load limit for heavy lifts
- Import-grade construction meets industrial rigging needs
- California Proposition 65 warning included for compliance
Specifications
| Brand | US CARGO CONTROL |
|---|
Questions about this item
Does the 5/8" bolt diameter match my existing lifting points?
The shackle uses a 5/8" steel bolt, so verify your lifting point accepts that pin size before use.
Will the 3.25 dimension align with my current rigging hardware?
The 3.25 measurement governs the shackle's internal clearance; compare it to your sling or hook throat opening to confirm fit.
How can I confirm the bolt type shackle is secured after installation?
Tighten the bolt fully so the collar seats against the shackle body and the cotter pin or locking mechanism engages completely.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
