US Cargo Control
US Cargo Control BTAS2 Anchor Shackle Bolt Type Import 2 Inch Steel 35 Ton
Bolt-type anchor shackle rated for 35 ton lifting and pulling applications
- Bolt-type pin secures loads without accidental release
- 35-ton rated capacity handles heavy lifting tasks
- Two-inch steel body resists deformation under stress
- Import specification meets standard industrial requirements
- California Proposition 65 notice included for chemical awareness
Anchor Shackle Bolt Type 2 Inch 35 Ton
This bolt-type anchor shackle is built from steel for heavy lifting and rigging tasks. It suits industrial, construction and transport professionals who need a rated connection point. The 35-ton working load limit supports demanding load-securing and hoisting applications.
Working Load Limit 35 Ton
The single specification that decides fit is the 35-ton working load limit. Verify that the load to be lifted or secured stays within this rating before use. Exceeding the limit risks failure and injury.
Capacity and Headroom
The shackle comfortably handles loads up to its 35-ton rating in straight-line pulls. It runs out when side loading, shock loading or loads above the rated capacity are applied. California Proposition 65 warns that this product contains a chemical known to the State of California to cause cancer.
Highlights
- Bolt-type pin secures loads without accidental release
- 35-ton rated capacity handles heavy lifting tasks
- Two-inch steel body resists deformation under stress
- Import specification meets standard industrial requirements
- California Proposition 65 notice included for chemical awareness
Specifications
| Brand | US CARGO CONTROL |
|---|
Questions about this item
How does the 35 ton rating apply when the shackle is installed in a rigging system?
The 35 ton working load limit is the maximum force the shackle can carry when the pin is fully tightened and the load pulls straight along the shackle axis; side loading or an unsecured pin reduces the safe capacity.
What standard governs the bolt-type pin and what does it limit in use?
The bolt-type pin follows common anchor shackle dimensions and is limited by the 35 ton working load limit; exceeding that load or applying shock loads can cause permanent deformation.
What clearance and pin diameter are needed to mount this 2 inch shackle?
The shackle body measures 2 inches across the bow, and the bolt-type pin matches that nominal size, so the mounting hole or link must accept a 2 inch pin diameter with enough room for the nut and cotter pin.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
