US Cargo Control
US Cargo Control 4050S3 Snatch Block 3/8" wire 3" sheave
Snatch block accommodates 3/8 inch wire rope with a 3 inch sheave for lifting and pulling tasks
- Snatch block redirects 3/8" wire rope for versatile lifting
- 3" sheave diameter accommodates standard 3/8" cable sizes
- US Cargo Control brand ensures reliable hardware performance
- New condition guarantees full structural integrity out of box
- California Proposition 65 warning indicates chemical hazard awareness
US Cargo Control 4050S3 Snatch Block
This new snatch block is built for lifting and pulling tasks that require a change of direction or mechanical advantage. It suits rigging professionals and automotive recovery work where a 3/8 inch wire rope is specified. The unit arrives ready for service in new condition.
3 inch sheave with 3/8 inch wire groove
The sheave diameter matches 3/8 inch wire rope to reduce bending fatigue and maintain rope strength during operation. A swivel hook or shackle connection allows the block to orient freely under load, preventing rope twist in multi-part line setups. Steel construction withstands repeated tension cycles in field use.
Rated for 3/8 inch wire rope only
This block is engineered specifically for 3/8 inch diameter wire rope; using larger or smaller rope will compromise safety and performance. It does not accommodate synthetic rope, chain or webbing. Verify your rope diameter before purchase to ensure compatibility.
Highlights
- Snatch block redirects 3/8" wire rope for versatile lifting
- 3" sheave diameter accommodates standard 3/8" cable sizes
- US Cargo Control brand ensures reliable hardware performance
- New condition guarantees full structural integrity out of box
- California Proposition 65 warning indicates chemical hazard awareness
Specifications
| Brand | US CARGO CONTROL |
|---|
Questions about this item
What size wire rope fits the 3 inch sheave on this 4050 snatch block?
The 3 inch sheave is sized for 3/8 inch wire rope, matching the 4050S3 specification for lifting and pulling tasks.
What anchor point does the 4050 snatch block need for mounting?
The block includes a hook with a latch that attaches to a rated shackle, eye bolt or other certified anchor capable of the load.
How is the 4050 snatch block installed on the wire rope?
Open the side plate by removing the pin, lay the rope in the sheave groove, close the plate and fully seat the pin — forgetting the pin is the common error.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
