We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact grey industrial converter, DB9 female to male, 113 by 55 by 25 mm

UOTEK

UOTEK UT-208 RS-232 to RS-485/422 Data Converter DB9 Female to Male

SKU CH-S8PQ-0V2HT

Converts RS-232 signals to RS-485 or RS-422 with 2.5KV isolation, 5,000m range at 9,600bps, and automatic data direction control for up to 128 devices

  • TypeConverter
  • Connector ADB9 female
  • Connector BDB9 male
  • Converts RS-232 to RS-485 or RS-422 for industrial serial integration
  • Automatic data direction control removes need for external RTS flow control signals
  • 5KV rms isolation with 600W surge protection safeguards connected equipment from transients
  • Supports up to 128 devices on a single bus over 5000m at 9600bps
  • Operates from -40 to 85°C with plug-and-play compatibility across all OS

Industrial RS-232 to RS-485/422 Converter

The UOTEK UT-208 bridges a single RS-232 port to balanced differential RS-485 or RS-422 networks. It targets engineers and integrators who need reliable serial links in noisy industrial environments. The unit operates without external flow-control signals, using automatic data direction control for genuine TXD, RXD and GND communication. It suits legacy equipment upgrades where isolation and surge protection are mandatory.

128-Node Multi-Drop at Up to 5 km

The converter handles baud rates from 300 bps to 115.2 Kbps and supports up to 128 RS-485 or RS-422 devices on one bus. At 9,600 bps the transmission distance reaches 5,000 metres over twisted-pair or shielded cable. Half-duplex RS-485 and full-duplex RS-422 modes are selected automatically without jumpers. The link is limited to asynchronous operation; synchronous protocols are not supported.

2.5 kV Isolation and 600 W Surge Protection

Optoelectronic isolation rated at 2.5 kV rms and a dedicated DC/DC module shield the host side from ground loops. Each RS-485/422 line carries 600 W lightning and surge protection, backed by power and data-flow indicators for quick fault diagnosis. The DB9 female-to-male housing measures 113 by 55 by 25 mm and runs from -40 to 85 °C at 5 to 95 % humidity. No driver installation is required on any operating system.

Highlights

  • Converts RS-232 to RS-485 or RS-422 for industrial serial integration
  • Automatic data direction control removes need for external RTS flow control signals
  • 5KV rms isolation with 600W surge protection safeguards connected equipment from transients
  • Supports up to 128 devices on a single bus over 5000m at 9600bps
  • Operates from -40 to 85°C with plug-and-play compatibility across all OS

Specifications

BrandUOTEK
ModelUT-208
TypeConverter
Connector ADB9 female
Connector BDB9 male

Questions about this item

Will the UT-208 work with my legacy RS-232 equipment running at 9600 baud over long cable runs?

Yes, the converter supports 300 to 115.2K bps and reaches 5,000 m at 9,600 BPS using twisted-pair or shielded cable.

How can I verify the UT-208 is operating correctly once installed?

Built-in power and data-flow indicators show activity, while the failure-detection function alerts you to line faults.

Does the UT-208 package include the twisted-pair cable needed for the RS-485 side?

The box contains the DB9 female-to-male converter only; twisted-pair or shielded cable for the RS-485/422 link must be purchased separately.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.