Uniweld
Uniweld MTF-9 Brazing Tip 9 Flame 2 in capacity
A 9-flame brazing tip for acetylene torches, handling up to 2 in capacity with 5–9 scfh flow range
- TypeWelding Parts & Supplies
- 9-flame tip produces even heat for 2 in brazing capacity
- Acetylene-fuelled stainless steel tip operates at 5–9 scfh flow range
- Fits Victor 71, WH550 and 100FC series torches without adapters
- 8½ in overall length gives reach in tight joint areas
- Maximum 7 psig fuel pressure rating supports consistent flame control
Uniweld MTF-9 Brazing Tip Overview
The Uniweld MTF-9 is a stainless steel brazing tip designed for acetylene fuel. It produces a 9 Flame pattern and offers a maximum brazing capacity of 2 in. The tip belongs to the MTF series and fits compatible torch series including 71 and WH550. It measures 8 1/2 in overall length.
Suitable Applications and Limitations
This tip suits technicians performing brazing and heating tasks with acetylene at pressures up to 7 psig. Flow rates between 5 and 9 scfh are supported for consistent flame control. It is not for operators using alternative fuel types or requiring larger capacity tips beyond the 2 in maximum. Builders needing different thread patterns should verify torch compatibility before purchase.
Build Integration and Compatibility
The MTF-9 connects directly to Victor torch handles and compatible part numbers such as 100FC, 100FP, 103-01FP, 315FC, 71, H 315FC, J-28, J-40, MD100TH, WH250, and WH550. Its stainless steel construction resists wear during repeated heating cycles. The tip frees up workflow by providing a focused 9 Flame pattern for precise joint work without changing tips mid-job.
Highlights
- 9-flame tip produces even heat for 2 in brazing capacity
- Acetylene-fuelled stainless steel tip operates at 5–9 scfh flow range
- Fits Victor 71, WH550 and 100FC series torches without adapters
- 8½ in overall length gives reach in tight joint areas
- Maximum 7 psig fuel pressure rating supports consistent flame control
Specifications
| Type | Welding Parts & Supplies |
|---|---|
| Brand | UNIWELD |
Questions about this item
Which torch handle must I already own to attach this MTF-9 tip?
The tip fits Uniweld 71 and WH550 handles, plus Victor 100FC, 100FP, 103-01FP, 315FC, H 315FC, J-28, J-40, MD100TH, WH250 and WH550 models.
Will the nine-flame pattern work with my existing acetylene regulator set at low pressure?
Yes, the tip operates between 5 and 9 scfh acetylene flow with a maximum fuel pressure of 7 psig, matching typical low-pressure regulator settings.
How can I confirm the tip is delivering its full 2 in brazing capacity after installation?
A neutral flame with nine distinct cones and steady inner-cone length indicates correct flow; the stainless steel tip should maintain that pattern without flutter at the rated pressure.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
