Uniweld
Uniweld MTF-17 Brazing Tip 17 Flame 11 in
Stainless-steel brazing tip with 17 flames, 11 in long, rated for up to 3 in capacity on acetylene at 12 psig
- TypeWelding Parts & Supplies
- Brazes up to 3 in pipe with 17-flame tip
- 17-flame pattern gives wide, even heat for brazing
- Stainless steel body resists corrosion and wear
- Works with Victor 71, WH550 and compatible torch series
- Operates at 8–14 scfh acetylene flow range
Uniweld MTF-17 Brazing Tip 17 Flame
The Uniweld MTF-17 is a stainless steel brazing tip designed for acetylene fuel. It fits MTF series torches and compatible Victor models including the 71 and WH550 series. Professional plumbers and HVAC technicians use it for brazing and heating tasks up to a 3 in capacity.
Installation requires matching the tip
Thread the tip onto torches such as the 100FC, 100FP, 103-01FP, 315FC, H 315FC, J-28, J-40, MD100TH, WH250 or WH550. Problems arise when operators exceed the 12 psig maximum fuel pressure or run flow outside the 8 to 14 scfh range. Using the wrong torch series prevents a secure seal and stable flame.
Maximum brazing capacity of 3 in determines
This single limit defines the thickest joint the tip can reliably braze with acetylene. Jobs requiring larger diameters need a different tip size. The 11 in overall length and 17 flame configuration support standard reach and heat pattern for the rated capacity.
Highlights
- Brazes up to 3 in pipe with 17-flame tip
- 17-flame pattern gives wide, even heat for brazing
- Stainless steel body resists corrosion and wear
- Works with Victor 71, WH550 and compatible torch series
- Operates at 8–14 scfh acetylene flow range
Specifications
| Type | Welding Parts & Supplies |
|---|---|
| Brand | UNIWELD |
Questions about this item
How do I confirm the brazing tip is performing correctly after connecting it to my torch?
Check for a stable 17-flame pattern and verify the fuel pressure reads near 12 psig with flow between 8 and 14 scfh when brazing up to 3 in capacity.
What comes with the Uniweld MTF-17 and what must I supply separately?
The box contains the 11 in stainless-steel MTF-17 tip only; you must provide a compatible Victor-series torch such as 71, WH550, 100FC, 100FP, 103-01FP, 315FC, H-315FC, J-28, J-40, MD100TH or WH250, plus acetylene fuel and regulator.
Which tip size should I choose for my brazing job?
Select the size 17 tip when you need a 17-flame pattern and maximum 3 in brazing capacity with acetylene at 12 psig and 8 to 14 scfh flow.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
