Universal
Universal GP-Extreme 12W- Thermal Pad 120 x 120 x 1.5 mm
A 12 W/m·K thermal pad measuring 120 x 120 x 1.5 mm for GPU and component cooling
- Product TypeOther Accessories
- High thermal conductivity of 12 W/m·K for efficient heat transfer
- 120 x 120 mm size covers large components like GPUs and CPUs
- 5 mm thickness suits standard cooler-to-chip gaps
- Soft gel material conforms to uneven surfaces without pressure
- New condition ensures full performance and shelf life
Thermal pad for component cooling
The Universal GP-Extreme thermal pad measures 120 by 120 millimetres with a 1.5 millimetre thickness. It provides a thermal conductivity rating of 12 W/mK for transferring heat away from electronic components. The pad suits builders and technicians who need a compliant interface material for GPUs, memory modules or voltage regulators.
Replaces worn or lower-grade pads
This pad upgrades from dried-out factory pads or basic silicone sheets that no longer fill gaps evenly. The jump is worth it when temperatures climb under load or when a cooler remount demands a fresh, uniform layer. It is not for buyers who need a liquid-metal interface or a pad thicker than 1.5 millimetres for larger gaps.
Stable performance under sustained load
The 12 W/mK rating is maintained during continuous operation rather than only in short bursts. The material resists pump-out and does not harden quickly, keeping contact pressure consistent over time. This behaviour suits long rendering sessions, mining workloads or any scenario where the component stays hot for hours.
Highlights
- High thermal conductivity of 12 W/m·K for efficient heat transfer
- 120 x 120 mm size covers large components like GPUs and CPUs
- 5 mm thickness suits standard cooler-to-chip gaps
- Soft gel material conforms to uneven surfaces without pressure
- New condition ensures full performance and shelf life
Specifications
| Product Type | Other Accessories |
|---|
Questions about this item
What are the exact dimensions of the 12 W/mK GP-Extreme thermal pad?
The pad measures 120 mm by 120 mm with a thickness of 1.5 mm.
How do I install the GP-Extreme pad without trapping air bubbles?
Clean both surfaces, peel the protective film, align the 120 mm square pad, then press from the centre outward to remove trapped air.
When should the 1.5 mm GP-Extreme pad be replaced?
Replace it if the pad becomes hard, cracked, or no longer fills the gap evenly after a cooler remount.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
