Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.0091426BTC
In stock
Unitherm
Unitherm IE0445 45° Elbow Pipe Jacket 3" Wall
Insulated 45-degree elbow jacket with silicone-coated fiberglass cloth facing, fiberglass and mineral wool insulation, 900 °F rating, R-0.48.
- ColorGray
- TypePipes, Valves & Fittings
- Insulated elbow cover protects piping up to 900 °F
- Silicone-coated fiberglass cloth resists heat and wear
- Quick-release flap and wiretwists speed installation and removal
- Fits pipe circumferences from 6 in to 13 in
- R-value 0.48 delivers thermal efficiency for industrial systems
Industrial Insulation Elbow
This Unitherm IE0445 jacket insulates a 45-degree pipe elbow in industrial settings. The cover measures four inches by four inches with a three-inch insulation thickness. It fits circumferences between six and thirteen inches. The silicone-coated fiberglass facing resists temperatures up to nine hundred degrees Fahrenheit.
Temperature and Fit Limits
Continuous exposure above nine hundred degrees Fahrenheit exceeds the rated ambient limit. The quick-release flap and wire-twist fastening cannot accommodate circumferences smaller than six inches or larger than thirteen inches. The insulation blend of fiberglass and mineral wool provides an R-value of zero point four eight only within the stated temperature range.
Critical Sizing Parameter
The three-inch wall thickness is the single specification that determines whether this jacket matches the pipe insulation system. A different thickness creates thermal bridging or prevents the flap from sealing correctly. Verify the existing insulation depth before ordering.
Highlights
- Insulated elbow cover protects piping up to 900 °F
- Silicone-coated fiberglass cloth resists heat and wear
- Quick-release flap and wiretwists speed installation and removal
- Fits pipe circumferences from 6 in to 13 in
- R-value 0.48 delivers thermal efficiency for industrial systems
Specifications
| Brand | UNITHERM |
|---|---|
| Color | Gray |
| Type | Pipes, Valves & Fittings |
Questions about this item
Which thickness of elbow jacket should I choose for a 3-inch wall application?
The 3-inch wall thickness is built into this model, so there is no separate thickness option to select.
What does the R-value of 0.48 mean once the jacket is installed on a hot pipe?
It indicates modest thermal resistance; the jacket will reduce surface temperature and heat loss but is not a high-insulation wrap.
What does the OSHA listing cap in practice for this elbow jacket?
OSHA listing confirms the jacket meets workplace safety requirements for insulated piping; it does not impose a temperature or pressure limit beyond the 900 °F rating.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
