We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 30 AWG wrapping wire on a plastic spool, 200 m length, tin-plated copper core, PVC insulation

Unique-Bargains

Unique-Bargains Wrapping Wire 30 AWG 200M Black P/N DM-30-1000

SKU CH-HM8P-MVHHF

Tin-plated copper wrapping wire, 30 AWG single strand with PVC insulation, 200 m on a plastic spool, rated to 105 °C for breadboard and PCB work

  • TypeWire Wrapping Wire
  • 30 AWG gauge suits dense breadboard wiring
  • 200 metre length on spool gives ample supply
  • Tin-plated copper core resists corrosion
  • PVC insulation rated to 105 °C
  • 58 mm outer diameter fits standard 0.25 mm pins

Precision Wire for Fine-Pitch Work

This 30 AWG tin-plated copper wire on a 200 metre spool is built for hobbyists, students and technicians who hand-wrap connections on breadboards, test jigs, JTAG headers and dense PCB rework. The 0.25 mm solid core and 0.58 mm PVC insulation resist heat to 105 °C and feed cleanly from the included plastic spool.

Limited to Low-Current Signal Paths

It suits point-to-point signal routing and prototype wiring where flexibility and thin insulation matter. Builders who need to carry more than a few hundred milliamps, run mains-voltage circuits or require multi-strand flexibility for repeated flexing should select a heavier gauge or a different insulation class.

30 AWG Single-Strand Gauge Decides Fit

The 0.05 mm² cross-section determines whether the wire threads through your header holes, wraps tightly on a 0.25 mm post and stays intact during soldering. Verify that your board layout and current budget match this gauge before ordering.

Highlights

  • 30 AWG gauge suits dense breadboard wiring
  • 200 metre length on spool gives ample supply
  • Tin-plated copper core resists corrosion
  • PVC insulation rated to 105 °C
  • 58 mm outer diameter fits standard 0.25 mm pins

Specifications

BrandUnique Bargains
TypeWire Wrapping Wire

Questions about this item

At what temperature does the 30 AWG wrapping wire's insulation reach its limit during continuous operation?

The PVC insulation is rated to 105 °C, so sustained loads that push the conductor above that temperature will exceed the wire's thermal limit.

How much heat does the tin-plated copper wire generate when carrying current all day?

Heat rise depends on the current you run through the 0.25 mm single strand; the wire itself is rated for 105 °C ambient plus temperature rise, so stay within that total.

What tool is required to terminate this 30 AWG wire on a breadboard or test jig?

A standard wire-wrap tool sized for 30 AWG (0.25 mm core) is needed to make reliable connections on posts or pins.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.