We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small square DC 12V cooling fan black plastic frame 30x30x32mm 305mm cable two pin connector

Unique-Bargains

Unique-Bargains V6 Cooling Fan DC 12V 30x30x32mm 305mm Cable

SKU CH-8RR0-S52AC

DC 12V cooling fan for 3D printer hotends with 305mm cable and 22mm heatsink fit

  • Cools 3D printer extruders efficiently with DC 12V operation
  • Fits 22 mm heatsinks for direct press-on mounting
  • 305 mm cable allows flexible routing inside printer frames
  • Compact 30 x 30 x 32 mm body suits tight extruder assemblies
  • Standard 2.54 mm 2-pin plug connects to common controller boards

12 V Cooling Fan for 3D Printer Extruders

This 30 x 30 x 32 mm DC fan mounts on a 22 mm heatsink cover to pull heat away from the hot-end. It runs on 12 V and fits RepRap, Rostock, Prusa Mendel, Huxley and similar machines. The 305 mm cable reaches most controller boards without extension.

2-Pin 2.54 mm Connector Simplifies Wiring

The included fan ships with a standard two-pin plug that matches common 3D-printer control boards. No soldering or crimping is required, so installation is a simple press-fit onto the heatsink and a single connector insertion.

25 mm Mounting Pitch and 3 mm Holes

Four mounting holes on a 25 x 25 mm pitch align with typical V6-style hot-end brackets. The compact 30 mm square frame leaves clearance for surrounding components while the 32 mm depth keeps the overall profile low.

Highlights

  • Cools 3D printer extruders efficiently with DC 12V operation
  • Fits 22 mm heatsinks for direct press-on mounting
  • 305 mm cable allows flexible routing inside printer frames
  • Compact 30 x 30 x 32 mm body suits tight extruder assemblies
  • Standard 2.54 mm 2-pin plug connects to common controller boards

Specifications

BrandUnique Bargains

Questions about this item

Will the 2.54 mm 2-pin connector need an adapter when I replace this fan?

The fan uses a standard 2.54 mm pitch 2-pin plug, so it fits most 3D-printer controller boards directly.

What is the first limit reached when the fan runs continuously at 12 V?

The motor is rated for 12 V DC; exceeding that voltage is the first limit that can cause failure.

How much noise and heat does the 30 × 30 × 32 mm fan produce during all-day printing?

The compact 30 mm frame moves air across a 22 mm heatsink cover, staying cool to the touch while running at 12 V.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.