We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White and silver USB Type A female SMD connector, 180 degree mount, 4 pins, 10 by 13 by 7 mm

Unique-Bargains

Unique-Bargains USB 2.0 Type A Female 4-Pin 180° SMD SMT Conduit

SKU CH-53B2-JTKN9

A USB 2.0 Type A female connector with four pins, 180° orientation and SMD mounting for PCB assembly

  • TypeHI - Conduit & Fittings
  • Shielded USB 2.0 female port for reliable data transfer
  • 180° vertical SMD mount fits tight PCB layouts
  • Four-pin 1.8 mm spacing matches standard footprints
  • Compact 10 × 13 × 7 mm metal body saves board space
  • Pack of five connectors ready for production runs

USB 2.0 Type A female port for PCB assembly

This shielded connector provides a 180-degree USB 2.0 Type A female receptacle with four pins for surface-mount soldering onto a printed circuit board. It suits engineers and hobbyists adding a standard USB host or device interface to custom electronic designs.

Check pin spacing and board layout before ordering

Verify that your PCB footprint matches the 1.8 mm pin spacing and 12 mm mounting-pin distance. The component measures 10 mm long, 13 mm wide and 7 mm high, so confirm adequate clearance and pad dimensions for SMD reflow or hand soldering.

Metal shell maintains shielding during extended use

The metal housing and electronic-parts construction preserve signal integrity and mechanical retention over repeated insertion cycles. Heat from sustained data or power transfer is dissipated through the shielded body without deformation of the white and silver moulding.

Highlights

  • Shielded USB 2.0 female port for reliable data transfer
  • 180° vertical SMD mount fits tight PCB layouts
  • Four-pin 1.8 mm spacing matches standard footprints
  • Compact 10 × 13 × 7 mm metal body saves board space
  • Pack of five connectors ready for production runs

Specifications

BrandUnique Bargains
TypeHI - Conduit & Fittings

Questions about this item

What comes in the pack and is anything else needed to install the connector?

The pack contains five shielded USB 2.0 Type A female ports with a 180-degree SMD/SMT footprint. Solder and a PCB with matching pads are required but not included.

Should I choose the 180-degree version or look for a different angle for my board?

Choose the 180-degree version when the USB port must face straight out from the PCB edge; a right-angle or vertical variant would be needed for a different orientation.

What does the 12 mm mount-pin distance mean when I lay out the footprint?

The two mounting pins are spaced 12 mm apart centre-to-centre, so the PCB footprint must provide matching holes or pads at that exact pitch.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.