We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ten right-angle USB Type A male plugs, metal pins, black plastic bodies

Unique-Bargains

Unique-Bargains USB 2.0 Type A 90 Degree 4 Pin Male Plug Conduit

SKU CH-YJKE-KJ663

A pack of ten USB 2.0 Type A 90-degree male connectors with 2 mm pin spacing for PCB mounting

  • TypeHI - Conduit & Fittings
  • Right-angle design saves space in tight enclosures
  • USB 2.0 Type A male with four pins for standard connectivity
  • 90-degree orientation eases cable routing on dense boards
  • 2 mm pin spacing matches common PCB footprints
  • Pack of ten connectors covers multiple assembly jobs

90-Degree USB 2.0 Connector

This Unique-Bargains conduit component is a USB 2.0 Type A male plug with a 90-degree orientation and four pins. It is intended for builders or repair technicians who need a right-angle connection on a printed circuit board or panel.

Solder Mount With 12 mm Spacing

The terminals sit on a 12 mm mount distance with 2 mm pin spacing, so the footprint must match the board layout before soldering. A common issue is misaligning the 20 x 12 x 4 mm body against the pads, which can stress the joints or block adjacent components.

Suits Right-Angle PCB Builds

This part suits anyone adding a side-entry USB port to a custom board or replacing a damaged socket in tight clearance. It does not suit designs that require a vertical straight plug, a female receptacle, or a different pin count.

Highlights

  • Right-angle design saves space in tight enclosures
  • USB 2.0 Type A male with four pins for standard connectivity
  • 90-degree orientation eases cable routing on dense boards
  • 2 mm pin spacing matches common PCB footprints
  • Pack of ten connectors covers multiple assembly jobs

Specifications

BrandUnique Bargains
TypeHI - Conduit & Fittings

Questions about this item

How can I confirm the USB 2.0 Type A 90-degree plug is working after soldering it to the PCB?

Verify a solid solder joint on all four pins spaced 2mm apart, then connect a USB 2.0 device and check that the host recognises it and transfers data at USB 2.0 speeds.

What comes in the box and what must I source separately?

The pack contains ten USB 2.0 Type A 90-degree 4-pin male plugs; you will need a PCB with matching 12mm terminal mount holes, solder, flux and a soldering iron.

Which version should I choose for a standard USB 2.0 Type A board layout?

Select this 90-degree 4-pin male plug with 12mm terminal mount distance and 2mm pin spacing to match the standard USB 2.0 Type A footprint.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.