We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Five silver USB 2.0 Type A male PCB connectors with white insulators and 2 mm pin spacing

Unique-Bargains

Unique-Bargains USB 2.0 A Male PCB Mount Conduit 5 Pcs

SKU CH-4E4X-Z84VS

Set of five USB 2.0 Type A male PCB-mount connectors for soldering onto circuit boards

  • TypeHI - Conduit & Fittings
  • USB 2.0 Type A male port for direct PCB mounting
  • 4-pin solderable connector simplifies board-level repairs
  • Compact 20 x 12 x 6 mm footprint fits tight layouts
  • 11 mm pin spacing matches standard USB footprints
  • Metal shell and white insulator ensure durable mating cycles

USB 2.0 Type A male PCB mount conduit

This pack contains five USB 2.0 Type A male connectors designed for PCB mounting or soldering. Each unit provides a four-pin interface suitable for repairing or adding USB ports to circuit boards. The silver-tone metal housings with white insulators are supplied new and ready for assembly work.

2 mm pin spacing and 11 mm mount distance

The connectors feature a 2 mm pin pitch and an 11 mm mounting pin distance, fitting standard PCB footprints for this interface. Overall dimensions are 20 x 12 x 6 mm, giving a compact profile for tight board layouts. The 10 g total pack weight confirms these are lightweight signal components, not power-rated parts.

Five-piece repair pack for soldering workflows

Supplied as a set of five identical ports, the bundle supports multiple repair jobs or prototype builds without reordering. No cables, drivers or software are included; the parts are bare connectors intended for direct soldering onto a PCB. Buyers needing female receptacles, right-angle variants or shielded shells will need different components.

Highlights

  • USB 2.0 Type A male port for direct PCB mounting
  • 4-pin solderable connector simplifies board-level repairs
  • Compact 20 x 12 x 6 mm footprint fits tight layouts
  • 11 mm pin spacing matches standard USB footprints
  • Metal shell and white insulator ensure durable mating cycles

Specifications

BrandUnique Bargains
TypeHI - Conduit & Fittings

Questions about this item

Will the 11 mm pin spacing on this USB 2.0 Type A male connector match the footprint on my existing PCB?

The pins are spaced 2 mm apart and the two mounting pins sit 11 mm centre-to-centre, so compare those dimensions with your board layout before soldering.

How can I confirm the port is functioning correctly after I solder it in place?

Plug a known-good USB 2.0 device into the port; if the host enumerates the device and data transfers at 2.0 speeds, the four signal pins and the two mount pins are making proper contact.

What exactly is included in the pack and is anything else required for installation?

You receive five silver-tone USB 2.0 Type A male PCB-mount plugs weighing 10 g total; a soldering iron, solder and flux are needed to attach each connector to the board.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.