We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Unique-Bargains

Unique-Bargains Thermal Adhesive Tape 30mm x 25m x 0.2mm

SKU CH-G5NJ-HHKWP

Thermally conductive adhesive tape on a 25 m roll, 30 mm wide and .2 mm thick, bonds heatsinks to CPUs, GPUs, SSDs, LED strips and power electronics while insulating against short circuits

  • Thermal conductivity handles most electronics heat dissipation needs
  • Strong adhesion prevents components from falling off
  • Insulation eliminates short-circuit risks
  • Glass-fibre thickness .2 mm suits tight gaps
  • Roll length 25 m covers many applications

Thermal tape for component cooling

This double-sided adhesive tape is designed to transfer heat away from electronic parts. The 30 mm wide roll provides 25 m of length at a .2 mm glass-fibre thickness. It suits DIY builders and technicians who need a simple thermal interface for coolers or LED strips.

Suits small-area bonding; not for gap filling

The tape works well on flat surfaces such as CPU lids, GPU dies, SSD controllers, MOS tubes, IGBT chips and DDR modules where a thin, uniform bond is required. It is not intended for uneven gaps or thick interfaces that demand a compliant pad or liquid compound.

Handles 25 m of .2 mm coverage

One roll covers multiple small components — typical CPU, GPU, SSD or memory modules — with headroom for rework. Very large heatsinks or arrays needing thicker insulation will exceed the practical length and thickness this roll provides.

Highlights

  • Thermal conductivity handles most electronics heat dissipation needs
  • Strong adhesion prevents components from falling off
  • Insulation eliminates short-circuit risks
  • Glass-fibre thickness .2 mm suits tight gaps
  • Roll length 25 m covers many applications

Specifications

BrandUnique Bargains

Questions about this item

What surface size does the 30 mm width cover on a CPU or GPU?

The 30 mm width matches many standard CPU heat spreaders and GPU memory modules, letting you span the full contact area in one strip.

Can I apply this 0.2 mm tape over existing thermal paste on a cooler base?

No, the adhesive needs clean metal; remove old paste with isopropyl alcohol before pressing the tape onto the cooler or component.

How do I confirm the tape is conducting heat after installation?

Monitor component temperatures under load; a drop of several degrees versus the previous interface shows the 0.2 mm layer is transferring heat.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.