Unique-Bargains
Unique-Bargains Strain Relief Cord Boot Protector 10 Pcs 54mm Black
Pack of ten 54 mm black strain-relief boots with 16 mm mounting and 13 mm inner holes to protect charger, aviation-plug and power-tool cables from bending
- Protects cables from bending stress with 54 mm length
- Fits 13 mm inner diameter for charger and tool cords
- 16 mm mounting hole suits aviation plugs and power drills
- Black finish resists wear across workshop and home use
- Ten-piece pack covers multiple cable protection needs
Cord Boot Protector Pack
This set supplies ten black strain-relief boots that slide over cable ends to stop sharp bends at the connector. They suit phone chargers, aviation-style plugs, power-tool leads and electric-drill cords. The 54 mm length covers the vulnerable transition zone where flexing is greatest. Home users and trade electricians can finish a batch of leads in one go.
Long-Term Flex Resistance
Each boot is moulded from flexible PVC that retains its shape after repeated bending cycles. The 13 mm inner bore grips the cable jacket while the 16 mm mounting hole seats against the connector body. This geometry spreads the bending radius over the full 54 mm body so the copper conductors never see a tight kink. The material stays pliable in cold workshops and does not crack when coiled daily.
Critical Fit Dimension
The 13 mm inner diameter is the single measure that decides compatibility; cables thicker than 13 mm will not insert and thinner cables will not seal. The 16 mm mounting hole must clear the connector shell or the boot cannot seat flush. No other specification in the pack alters this fit requirement.
Highlights
- Protects cables from bending stress with 54 mm length
- Fits 13 mm inner diameter for charger and tool cords
- 16 mm mounting hole suits aviation plugs and power drills
- Black finish resists wear across workshop and home use
- Ten-piece pack covers multiple cable protection needs
Specifications
| Brand | Unique Bargains |
|---|
Questions about this item
Does the 16 mm mounting hole fit the cable entry on my power drill?
The boot has a 16 mm mounting hole and a 13 mm inner hole, so it suits cables up to about 13 mm diameter.
What cable diameter does the 13 mm inner hole actually accommodate?
The inner hole measures 13 mm, giving room for cables up to that thickness such as charger leads or drill cords.
Will these 54 mm long boots protect the flex point on my existing charger cables?
Each boot is 54 mm long and slides over the cable end to stop sharp bending at the connector.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
