Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.00938114BTC
In stock
Unique-Bargains
Unique-Bargains Spring Loaded Latch Pin 8.66" 2 Pack Iron Door Lock
Two electroplated-iron spring-loaded barrel bolts, 8.66 inches long with 12 mm bolts, mount vertically or horizontally on doors, gates, sheds or windows
- TypeDeadbolt Latches
- Durable electroplated iron resists wear and fading
- 12 mm bolt diameter secures doors firmly shut
- Two-pin design allows 90-degree rotation to open
- Vertical or horizontal mounting fits any orientation
- Two latches included for multiple doors or windows
Two-pack iron latch for doors and gates
This two-pack supplies two spring-loaded barrel bolts made from electroplated iron with a silver-tone finish. Each latch measures 8.66 by 1.57 inches overall and uses a 0.47-inch bolt to secure doors, windows, cupboards or shed openings. The design suits both vertical and horizontal mounting so the same hardware fits a range of frame orientations.
Electroplated iron resists wear and fading
The iron construction is electroplated to withstand daily use without fading, keeping the latch functional over a long service life. A sturdy barrel bolt holds the door firmly closed while the spring mechanism operates quietly during normal opening and closing. No power draw or thermal output is involved because the lock is entirely mechanical.
Dual-pin release aids one-hand operation
Each bolt incorporates two pins that let you pull the bolt back and rotate it 90 degrees to lock it in the open position, allowing one-hand entry without the latch springing shut. Mounting holes are 0.24 inches in diameter with a 79 mm by 27 mm spacing pattern, but screws are not included so you must supply suitable fixings for the substrate.
Highlights
- Durable electroplated iron resists wear and fading
- 12 mm bolt diameter secures doors firmly shut
- Two-pin design allows 90-degree rotation to open
- Vertical or horizontal mounting fits any orientation
- Two latches included for multiple doors or windows
Specifications
| Brand | Unique Bargains |
|---|---|
| Type | Deadbolt Latches |
Questions about this item
How do I mount the 220mm iron latch and which step is often missed?
Drill 6mm holes at the 79mm and 27mm centres, fasten with your own screws, then check that the 12mm bolt slides freely before tightening fully; the missed step is verifying bolt travel after the first screw.
What upkeep will the electroplated iron latch need over time?
Wipe the silver tone finish with a dry cloth, lubricate the spring and bolt with light machine oil once a year, and retighten mounting screws if the 40mm wide body shifts.
What is the first limitation you hit when the latch is cycled repeatedly?
The 12mm diameter bolt and spring mechanism are rated for normal residential use; under very high frequency cycling the spring tension will weaken before the iron body shows wear.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
