We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Three silver iron sliding barrel bolts with spring loaded pins and mounting plates

Unique-Bargains

Unique-Bargains Spring Loaded Latch Pin 5.71" 3 Pack Iron Door Lock

SKU CH-FKS9-BBTG5

Three electroplated iron spring-loaded latches with 10 mm bolts secure doors, gates or sheds and install vertically or horizontally without supplied screws

  • TypeDeadbolt Latches
  • Electroplated iron resists wear and fading
  • 10 mm bolt diameter secures doors firmly
  • Spring-loaded button allows 90-degree turn to open
  • Vertical or horizontal mounting fits any door
  • Three latches per pack for multiple entry points

Secure Gate Latch Set

This pack contains three spring-loaded barrel bolts made from electroplated iron. Each latch measures 145 mm long by 40 mm wide with a 10 mm bolt diameter. The silver-tone finish resists fading during long-term outdoor or indoor use.

Flexible Mounting Hardware

Mounting holes are 6 mm in diameter with spacing of 45 mm and 25 mm between centres. The design allows both vertical and horizontal installation on gates, shed doors, windows or cupboards. Screws are not supplied so you must provide your own fixings.

Manual Slide Operation

To open, pull the bolt back and rotate it 90 degrees into the button groove. The mechanism relies entirely on hand force and the internal spring; there is no key, handle or electronic release. Buyers needing keyed security or remote access should choose a different lock type.

Highlights

  • Electroplated iron resists wear and fading
  • 10 mm bolt diameter secures doors firmly
  • Spring-loaded button allows 90-degree turn to open
  • Vertical or horizontal mounting fits any door
  • Three latches per pack for multiple entry points

Specifications

BrandUnique Bargains
TypeDeadbolt Latches

Questions about this item

What diameter does the 10 mm bolt require for the mounting holes?

The mounting holes are 6 mm in diameter, so you need a 6 mm drill bit for the supplied bolts.

Will the 45 mm and 25 mm hole spacings match my existing gate hardware?

The latch has two sets of mounting holes spaced at 45 mm and 25 mm; measure your current pattern to confirm compatibility.

How do I set the spring bolt to stay open without it snapping back?

Pull the bolt out, rotate it 90 degrees until the button groove catches, and the bolt will hold in the open position.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.