We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Square blue silicone thermal pad 100mm by 100mm by 2mm

Unique-Bargains

Unique-Bargains Soft Silicone Thermal Pad 100x100x2mm Blue 1.5 W/m-K

SKU CH-2FSG-9EPM1

A 100 × 100 mm soft silicone pad rated at 1.5 W/m-K fills gaps between components and heatsinks to improve heat transfer

  • Improves heat transfer with 1.5 W/m-K conductivity
  • Fills uneven gaps between heatsink and component
  • Soft silicone cushions and dampens vibration
  • Withstands operating temperatures from 50 to 200
  • Ready-to-use 100 x 100 mm pad size

Gap-filling thermal pad

This soft silicone pad measures 100 mm by 100 mm by 2 mm and provides a thermal conductivity of 1.5 W/m-K. It is designed to bridge uneven surfaces between a component and a heatsink for improved heat transfer. The blue pad withstands operating temperatures from 50 to 200 °C and includes a protective film for clean installation.

Suits thin-gap applications

Builders fitting memory modules, voltage regulators or small ICs where a 2 mm thickness matches the stack height will benefit from the compliant silicone. It is not intended for large CPU or GPU dies that typically require thinner interfaces or higher-conductivity materials. Users needing custom shapes must cut the sheet themselves.

Ready-to-use sheet

The package contains a single 100 x 100 mm pad with protective film on both faces. No additional compounds, tools or adhesives are supplied. The installer simply cleans the mating surfaces, removes the film and positions the pad.

Highlights

  • Improves heat transfer with 1.5 W/m-K conductivity
  • Fills uneven gaps between heatsink and component
  • Soft silicone cushions and dampens vibration
  • Withstands operating temperatures from 50 to 200
  • Ready-to-use 100 x 100 mm pad size

Specifications

BrandUnique Bargains

Questions about this item

What heatsink and component surfaces must already be clean before placing the 100 mm × 100 mm × 2 mm pad?

Both the heatsink and the device surface need to be cleaned first, then the protective film removed, before the pad is positioned between them.

Will the 1.5 W/m-K pad stay effective if my system runs at the upper end of the 50 to 200 withstand range?

The silicone material is rated to withstand temperatures from 50 up to 200, so it remains stable across that entire span.

After fitting the pad, how can I confirm thermal transfer has improved?

Monitor the component temperature under load; a lower steady-state reading than before installation shows the pad is bridging the gap and conducting heat to the heatsink.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.