We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Clear flexible silicone tubing, 10mm inner diameter, 13mm outer diameter, 1 metre length

Unique-Bargains

Unique-Bargains Silicone Tubing 10mm x 13mm 1m Clear

SKU CH-A41E-F9BYF

Clear 10 mm bore silicone tube, 1 m long, handles -76 °F to +428 °F at 65 hardness

  • Clear tubing lets you monitor flow visually
  • 1 m length suits many pump and transfer tasks
  • Silicone rubber handles -76 °F to 428 °F without degrading
  • 5 mm wall (65 Shore A) balances flexibility and burst resistance
  • 10 mm ID by 13 mm OD fits standard 10 mm barbs and fittings

Clear silicone tubing for pump and transfer jobs

This 1-metre length has a 10 mm inner diameter and a 13 mm outer diameter, giving a 1.5 mm wall. It handles temperatures from -76 °F to 428 °F and carries a 65-degree hardness rating, so it stays flexible without kinking in demanding fluid paths. The clear finish lets you see flow and bubbles at a glance.

Supplied as a single ready-to-cut length

The package contains one continuous piece of tubing with no fittings, clamps or connectors included. You trim it to the exact run you need and add the couplings your application requires, whether for water or oil changes, siphoning, machinery links or electrical sleeving.

Pushes onto barbs and seals with standard clamps

Installation is a matter of cutting cleanly, sliding over the fitting and tightening a hose clip; the soft silicone grips well without adhesive. The only common issue is cutting the tube too short or using a barb that exceeds the 10 mm bore, which prevents a proper seal.

Highlights

  • Clear tubing lets you monitor flow visually
  • 1 m length suits many pump and transfer tasks
  • Silicone rubber handles -76 °F to 428 °F without degrading
  • 5 mm wall (65 Shore A) balances flexibility and burst resistance
  • 10 mm ID by 13 mm OD fits standard 10 mm barbs and fittings

Specifications

BrandUnique Bargains

Questions about this item

How often should the 10mm ID x 13mm OD silicone tube be replaced in a pump transfer setup?

Replace it when the clear wall shows cracking, hardening or permanent deformation; the 1.5mm wall and 65 Shore A hardness resist wear, but inspection every few months is prudent.

What is the first limit reached when the tubing runs continuously at high temperature?

The 428 °F upper operating temperature is the hard limit; above it the silicone rubber degrades rapidly, so sustained use must stay below that figure.

Does the 1 m clear silicone hose emit smell or heat when used all day for water or oil transfer?

The non-reactive silicone rubber produces no odour and adds negligible heat; it simply conveys fluid within its -76 °F to 428 °F range.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.