We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black silicone tube 6mm ID 10mm OD 9.8ft coiled

Unique-Bargains

Unique-Bargains Silicone Hose 6mm ID 10mm OD 9.8ft Black

SKU CH-7XZ6-8F1AE

Black silicone tubing with 6 mm inner and 10 mm outer diameter, 9.8 ft length, withstands -76 °F to 428 °F for pump and transfer use

  • Operates from -76 °F to +428 °F for extreme temperature resilience
  • 8 ft continuous length covers long runs without joints
  • 2 mm / .08 in wall thickness balances strength and flexibility
  • 65 Shore A hardness keeps the tube soft yet kink-resistant
  • Non-reactive silicone rubber suits water, oil and air transfer duties

Unique-Bargains 6 mm ID Silicone Hose

This 9.8 ft black silicone tube has a 6 mm inner diameter and 10 mm outer diameter. It is built for pump and transfer tasks where a flexible, non-reactive line is required. The 2 mm wall handles vacuum and moderate pressure without collapsing. Automotive, marine and workshop users will find it a direct fit for many fluid circuits.

Pushes onto barbs without tools

The soft 65-degree silicone slides over 6 mm fittings and seals by friction alone. No clamps are needed for low-pressure runs, though a worm-drive clip adds security on pressurised lines. Cold weather makes the material stiffer; warming the end in hot water eases installation. Sharp barbs or undersized nipples can tear the bore, so inspect fittings before pushing the hose on.

Rated from -76 °F to 428 °F

The tube moves coolant, oil, water or air continuously across that full range without hardening or melting. At the upper limit the silicone remains stable but loses some mechanical strength, so avoid sustained pressure near 428 °F. It is not suited for fuel, brake fluid or aggressive solvents, which swell the rubber and cause leaks. For those fluids a fluoropolymer-lined hose is required.

Highlights

  • Operates from -76 °F to +428 °F for extreme temperature resilience
  • 8 ft continuous length covers long runs without joints
  • 2 mm / .08 in wall thickness balances strength and flexibility
  • 65 Shore A hardness keeps the tube soft yet kink-resistant
  • Non-reactive silicone rubber suits water, oil and air transfer duties

Specifications

BrandUnique Bargains

Questions about this item

How can I check the 6mm ID × 10mm OD silicone hose is flowing correctly after installation?

Run the intended fluid through the hose and confirm steady flow without kinks, leaks at the connections, or collapse under vacuum; the tube should stay flexible from -76 °F to 428 °F.

What does the package contain and what extra items are needed to use it?

The box includes one 9.8 ft length of black silicone tubing; you will need to source barbed fittings or push-fit connectors and suitable clamps for the 10 mm outer diameter.

Which diameter and length combination should I select for a pump transfer line?

Choose the 6 mm inner diameter, 10 mm outer diameter, 9.8 ft roll when your system requires that bore size and a continuous run up to three metres.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.