Unique-Bargains
Unique-Bargains Silicone Hose 5mm ID × 8mm OD 1 m Black
Silicone tubing with 5 mm inner and 8 mm outer diameter, 1 m length, handling -76 °F to 428 °F for liquid and gas transfer
- 1 m length gives 3.3 ft of tubing for flexible routing
- 5 mm inner × 8 mm outer diameter with 1.5 mm wall suits tight spaces
- Silicone rubber handles -76 °F to 428 °F for extreme temperature use
- 65 Shore A hardness keeps tube soft yet kink-resistant when bent
- Transfers air, water or other fluids in pumps, drains and aquarium lines
Silicone tubing for liquid and gas transfer
This 1 metre length of black silicone tubing has a 5 mm inner diameter and an 8 mm outer diameter with a 1.5 mm wall. It is suited to aquarium air lines, pump connections, drain lines and general liquid or gas transfer where a flexible, high-temperature hose is required. The material remains soft and easy to bend during installation and use.
Temperature range and pressure limits
The tube withstands continuous temperatures from -60 °C to 200 °C (-76 °F to 392 °F) and has a Shore A hardness of 65 degrees. It is not rated for high-pressure hydraulic systems or applications that exceed the stated temperature envelope, and no burst-pressure figure is provided by the supplier.
One metre length and single-line capacity
The 1 m roll handles a single aquarium airline, a pump feed or a drain run without joins. Projects needing longer continuous runs, multiple branches or larger flow diameters will require additional tubing or a different size.
Highlights
- 1 m length gives 3.3 ft of tubing for flexible routing
- 5 mm inner × 8 mm outer diameter with 1.5 mm wall suits tight spaces
- Silicone rubber handles -76 °F to 428 °F for extreme temperature use
- 65 Shore A hardness keeps tube soft yet kink-resistant when bent
- Transfers air, water or other fluids in pumps, drains and aquarium lines
Specifications
| Brand | Unique Bargains |
|---|
Questions about this item
Should I choose a different length or diameter for my application?
This listing supplies a single 1 m length with 5 mm inner diameter and 8 mm outer diameter; no other sizes are offered here.
What does the 1.5 mm wall thickness mean when the hose is pressurised?
The 1.5 mm wall provides a balance of flexibility and burst resistance for low-pressure air, water or coolant transfer.
How does the silicone material handle the stated temperature range in practice?
It remains flexible from -60 °C to 200 °C, so it will not harden in freezing conditions or degrade in hot coolant lines.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Taylor 70204 Acrylic Coated Polyester Gray Hot Shot BoatGuard Boat Cover
- Transparent
BoatBuckle F12071 Kwik-Lok Gunwale Tie-Down Stainless Steel
- Transparent



