We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Clear flexible silicone tube 10mm ID 12mm OD 1m length

Unique-Bargains

Unique-Bargains Silicone Hose 10mm ID 12mm OD 1m Clear

SKU CH-ZBX8-7DCDM

Clear silicone tubing with 10 mm inner diameter and 12 mm outer diameter, 1 m long, withstands -60 °C to 200 °C for liquid and gas transfer

  • Clear 10 mm bore suits tight plumbing runs
  • 1 mm wall keeps hose light yet kink-resistant
  • Flexible silicone bends easily around engine bays
  • Withstands –60 °C to 200 °C for hot or cold fluids
  • 1 m length ready for aquarium, pump or drain use

Clear Silicone Hose for Fluid Transfer

This clear silicone tube has a 10 mm inner diameter and a 12 mm outer diameter with a 1 mm wall thickness. It is supplied in a one metre length that is equivalent to 3.3 ft. The material is flexible and resistant to high temperatures ranging from -60 °C to 200 °C.

Suited for Aquarium and Pump Lines

The hose handles liquid and gas transfer in applications such as aquarium water lines, pump connections and drain setups. It is not intended for pressurised fuel or hydraulic systems that require reinforced construction. Buyers needing a smaller bore or a longer continuous run should consider a different specification.

Check Fitment Before Ordering

Verify that the 10 mm inner diameter matches the barbs or fittings on your existing equipment. Ensure the operating temperature range covers the fluids you plan to move. Confirm that a single metre provides enough length for your routing without joints.

Highlights

  • Clear 10 mm bore suits tight plumbing runs
  • 1 mm wall keeps hose light yet kink-resistant
  • Flexible silicone bends easily around engine bays
  • Withstands –60 °C to 200 °C for hot or cold fluids
  • 1 m length ready for aquarium, pump or drain use

Specifications

BrandUnique Bargains

Questions about this item

What inner-diameter fitting do I need so the 10 mm bore seals properly?

Use barbs or push-fit connectors sized for a 10 mm inside diameter; the tube’s 1 mm wall gives a 12 mm outside diameter for clamp clearance.

Will the tube stay pliable when routed next to parts that reach 200 °C?

The silicone is rated from -60 °C to 200 °C, so it remains flexible at the upper limit without hardening or cracking.

How can I confirm the tube is flowing correctly after I install it?

Run the intended fluid or air through the line and check for steady, bubble-free movement and no leakage at the 10 mm ID connections.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.