We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White silicone-coated fiberglass sleeve, 1.5mm bore, 29.5ft coil

Unique-Bargains

Unique-Bargains Silicone Fiberglass Sleeve White 1.5mm 29.5Ft

SKU CH-AQ95-T8N6S

White silicone-coated fiberglass sleeve, 29.5 ft long with 1.5 mm bore, rated to 1200 V and –60 to 200 °C for high-temperature wire protection

  • TypeHeat Shrink Tubing
  • Withstands extreme heat from 60 to 200 degrees
  • VW-1 flame resistance protects against fire hazards
  • 1200V working voltage insulates high-power wiring
  • Alkali-free fiberglass with silicone resin ensures durability
  • 5 feet length covers multiple installation needs

What it is and who it fits

A 29.5-foot length of white silicone-coated fiberglass sleeving with a 1.5 mm inner diameter. It is sold new as heat-shrink tubing for automotive, marine or industrial wiring jobs where high-temperature protection and wire organisation are required.

Capacity and headroom

Rated for continuous use from 60 up to 200 and a working voltage of 1200 V with VW-1 flame resistance. The sleeve shields wires near motors, engines, plug leads or fuel lines, but it traps heat so wires running near their current limit can overheat and melt their own insulation.

Build and daily implications

Braided from alkali-free fiberglass yarn and bonded with silicone resin after high-temperature dewaxing and impregnation. The construction stays flexible for routing through tight engine bays or lighting fixtures, while the white finish makes circuit identification simple during maintenance.

Highlights

  • Withstands extreme heat from 60 to 200 degrees
  • VW-1 flame resistance protects against fire hazards
  • 1200V working voltage insulates high-power wiring
  • Alkali-free fiberglass with silicone resin ensures durability
  • 5 feet length covers multiple installation needs

Specifications

BrandUnique Bargains
TypeHeat Shrink Tubing

Questions about this item

Will the 1.5mm inner diameter slide over the 12 AWG engine wires I am keeping?

The sleeve has a 1.5mm inner diameter. Measure your 12 AWG wire insulation; if its outer diameter is 1.5mm or smaller the sleeve will fit.

How can I confirm the sleeve is performing correctly after installation?

Inspect the routing for kinks or compression, verify wires remain organised, and ensure no conductor exceeds the 60 to 200°C working temperature range.

What is included in the package and is any extra tooling required?

The box contains one 29.5ft length of white silicone fiberglass tubing. Scissors or a sharp knife are needed to cut it to length.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.