We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two small blue rectangular potentiometers with knurled shafts and five terminals each

Unique-Bargains

Unique-Bargains RV097NS 5K ohm passive component 2pcs

SKU CH-SDFD-AMJ41 MPN RV097NS

Two 5K ohm carbon-film potentiometers with switch, single-turn linear taper and knurled split shafts for push-on knobs

  • FeaturesHorizontal Multiturn Trimmer Potentiometers; Potentiometer R
  • 5K ohm resistance with ±10% tolerance for precise control
  • Single-turn carbon film element ensures smooth linear adjustment
  • Knurled 6 mm split shaft fits standard push-on knobs
  • Horizontal 27 mm body suits breadboard and PCB layouts
  • Pack of two potentiometers ready for audio or DIY projects

What this component does

The Unique-Bargains RV097NS is a carbon film potentiometer with an integrated switch, supplied as a pair of 5K ohm variable resistors. It suits hobbyists, repair technicians and students building or fixing audio equipment and other circuits that need manual level control.

The spec that decides fit

Each unit has a 5K ohm resistance value with a ±10 % tolerance, five terminals and a single-turn linear taper. The 6 mm knurled shaft is 10 mm long and accepts standard push-on knobs, while the 6.7 mm thread diameter fits common panel cut-outs.

Heat noise and power in use

As a passive carbon film element it generates no audible noise and negligible heat during normal adjustment. Power dissipation stays within the small 27 mm by 9 mm by 11 mm body without any forced cooling.

Highlights

  • 5K ohm resistance with ±10% tolerance for precise control
  • Single-turn carbon film element ensures smooth linear adjustment
  • Knurled 6 mm split shaft fits standard push-on knobs
  • Horizontal 27 mm body suits breadboard and PCB layouts
  • Pack of two potentiometers ready for audio or DIY projects

Specifications

BrandUnique Bargains
FeaturesHorizontal Multiturn Trimmer Potentiometers; Potentiometer Resistor Assortment;Vertical High Precision Variable Resistors;Breadboard Trim Resister ceramic;Assortment Kit for DIY or PCB

Questions about this item

What does the 5K ohm rating mean when the potentiometer is installed in a circuit?

The 5K ohm value sets the total resistance range between the end terminals; turning the shaft varies the divider ratio to adjust signal levels such as audio volume.

How does the 5-terminal layout with a switch affect wiring compared to a standard 3-terminal potentiometer?

Three terminals form the variable resistor track while the extra two connect an integrated switch that actuates at the end of rotation, letting you add on/off control without a separate component.

What panel cut-out and shaft clearance does the 6.7 mm thread and 6 mm shaft need?

Drill a 6.7 mm hole for the threaded bushing; the 6 mm knurled shaft protrudes 10 mm beyond the bushing, so allow at least that depth behind the panel for a push-on knob.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.