Unique-Bargains
Unique-Bargains Rubber Strain Relief Cord Boot Protector 27mm 15pcs
A pack of 15 black rubber strain-relief boots sized 27 mm long by 11 mm diameter to protect cable ends from bending
- FeaturesWire Sleeve;Protective Hose;for Cellphone Charger;Protective
- Protects cables from bending damage with rubber strain relief boot
- Fits 27 mm length and 11 mm max diameter for secure coverage
- Includes 15 pieces for multiple wire protection needs
- Compatible with aviation plugs, power tools and electric drill cables
- Black colour and model 14# for easy identification
Rubber Strain Relief Cord Boot Protector
This pack contains fifteen black rubber boots designed to shield cable ends from bending stress. They suit electricians and hobbyists who need to reinforce charger cords, power-tool leads or aviation-plug wiring. The parts are new and ready for immediate use.
27 mm length by 11 mm maximum diameter
Each boot measures 27 mm long with an 11 mm outer diameter at its widest point, matching the supplier’s 14# model dimensions. The internal bore accepts typical small-gauge flexible cables found on phone chargers and hand-held power tools.
Simple push-on installation
Slide the boot over the cable before terminating the connector, then seat it against the plug body to absorb flex loads. The tight friction fit holds without adhesive, though very soft or oversized jackets may slip if not matched to the bore.
Highlights
- Protects cables from bending damage with rubber strain relief boot
- Fits 27 mm length and 11 mm max diameter for secure coverage
- Includes 15 pieces for multiple wire protection needs
- Compatible with aviation plugs, power tools and electric drill cables
- Black colour and model 14# for easy identification
Specifications
| Brand | Unique Bargains |
|---|---|
| Features | Wire Sleeve;Protective Hose;for Cellphone Charger;Protective Pipe;Replacement Part |
Questions about this item
How much cable diameter does the 27 mm boot actually cover when fitted?
The protector has a maximum outer diameter of 11 mm and a length of 27 mm, so it shields roughly the first 27 mm of cable where it exits a plug or tool.
What connection standard or interface does this boot match?
It is a generic rubber sleeve with no threaded or keyed interface; it simply slides over the cable and relies on friction to stay in place.
What clearance is needed behind the connector for the 11 mm wide boot to sit flush?
Allow at least 27 mm of straight cable behind the plug so the 11 mm diameter boot can slide on and seat without kinking the wire.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
