We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Five black rubber grommets 30x45x6mm single side design

Unique-Bargains

Unique-Bargains Rubber Conduit Grommets 35mm 5pcs Black 30x45x6mm

SKU CH-KDJ3-641KE

Black rubber grommets protect cables passing through 35 mm panel holes

  • TypeHI - Conduit & Fittings
  • Protects cables from sharp edges using durable rubber construction
  • Five grommets per pack cover multiple routing points in one purchase
  • 35 mm inner diameter fits standard conduit and wiring bundles
  • 30 × 45 × 6 mm profile seats flush in panel cut-outs
  • Lightweight 27 g set adds negligible mass to assemblies

Rubber conduit grommets 35 mm

This pack supplies five black rubber grommets sized at 30 mm inner diameter and 45 mm outer diameter. They protect wires from chafing against drilled holes and guard against sharp sheet-metal edges. Suitable for replacing cracked grommets or running new cables through body panels.

Thermal noise and power draw

The rubber material adds no electrical load and generates no heat during normal use. No fan or active cooling is involved so the installation remains silent. Power draw is zero because the parts are passive cable protectors.

Five-piece set benefit

Five identical grommets let you seal multiple panel openings in one job without ordering extra packs. The single-side design simplifies fitting from one side of the panel. Net weight of the full set is 27 g.

Highlights

  • Protects cables from sharp edges using durable rubber construction
  • Five grommets per pack cover multiple routing points in one purchase
  • 35 mm inner diameter fits standard conduit and wiring bundles
  • 30 × 45 × 6 mm profile seats flush in panel cut-outs
  • Lightweight 27 g set adds negligible mass to assemblies

Specifications

BrandUnique Bargains
TypeHI - Conduit & Fittings

Questions about this item

How do I fit the 30 mm inner diameter grommet into a panel, and what is the common mistake?

Push the 30 mm inner diameter grommet into a matching hole so the 45 mm outer flange sits flush; the frequent error is drilling the hole larger than 30 mm, which lets the grommet pull through.

What maintenance or replacement will these rubber grommets need over time?

Rubber hardens and cracks with heat and UV exposure; inspect each 30x45x6 mm piece periodically and swap any that show splits or loss of elasticity.

What limit appears first when the grommets are used continuously in a hot engine bay?

The rubber material degrades under sustained high temperature, becoming brittle and losing its seal around the 35 mm cable passage before any mechanical wear occurs.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.