We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small right-angle USB 3.0 Type A female socket metal body PCB mount 16 x 13 x 6.8 mm

Unique-Bargains

Unique-Bargains Right Angle DIP PCB Mount USB 3.0 Connector Socket Conduit

SKU CH-PR1B-WMXPG

Right-angle USB 3.0 Type A female socket with 90-degree mounting and 9 pins for PCB soldering

  • TypeHI - Conduit & Fittings
  • Right-angle DIP mount fits tight PCB layouts with 90° orientation
  • USB 3.0 Type A female port delivers 3.0 speed for data transfer
  • 9-pin configuration on 2 mm pitch ensures secure solder connections
  • Compact 16 x 13 x 6.8 mm footprint saves board space
  • Metal and electronic-part construction provides durable conduit shielding

Right-Angle USB 3.0 PCB Connector

This right-angle USB 3.0 Type-A female socket mounts directly to a printed circuit board. It suits engineers and hobbyists adding a front-panel or internal port to custom hardware. The 90-degree orientation keeps cables parallel to the board, saving depth inside tight enclosures. The part is new and ready for soldering.

Metal Shell With 9 Through-Hole Pins

A metal housing shields the signal contacts while the nine mounting pins anchor the connector mechanically. Pin rows sit on 12 mm and 15 mm centres with 2 mm spacing between adjacent pins. Overall footprint measures 16 x 13 x 6.8 mm, so verify board outline and keep-out zones before layout. The through-hole design requires access to both sides of the PCB for soldering.

Replaces Straight Vertical USB Ports

This connector replaces a vertical Type-A jack when vertical clearance is limited or when cable strain relief must point sideways. The upgrade is worthwhile if the enclosure cannot accommodate a straight header and cable bend radius. It does not suit designs that need a vertical orientation, surface-mount termination, or a different pin-count footprint.

Highlights

  • Right-angle DIP mount fits tight PCB layouts with 90° orientation
  • USB 3.0 Type A female port delivers 3.0 speed for data transfer
  • 9-pin configuration on 2 mm pitch ensures secure solder connections
  • Compact 16 x 13 x 6.8 mm footprint saves board space
  • Metal and electronic-part construction provides durable conduit shielding

Specifications

BrandUnique Bargains
TypeHI - Conduit & Fittings

Questions about this item

What USB standard does the 3.0 Type A female port support and what speed does it cap at?

The connector provides a USB 3.0 Type A female port, which caps at the USB 3.0 specification speed of 5 Gbps.

What are the PCB hole spacing and overall footprint dimensions for mounting this right-angle connector?

The mount pins use a 2 mm pin spacing with distances of 12 mm and 15 mm, and the total body measures 16 x 13 x 6.8 mm.

How is the 90-degree DIP connector soldered to the board and which orientation step is often missed?

Insert the nine through-hole pins into the PCB matching the 12 mm and 15 mm spacing, then solder each pad; the key step often missed is aligning the USB port opening toward the board edge before soldering.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.