Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.00951132BTC
In stock
Unique-Bargains
Unique-Bargains Recessed Door Lock Bronze 4.8mm 65mm 94x75mm
A recessed bronze door lock with a 4.8 mm mounting hole, 65 mm hole spacing and 360° rotating pull ring for keyless sliding or invisible doors
- TypeDoor Knob Locksets
- Concealed pull handle keeps surfaces flush
- 8 mm mount hole fits standard cut-outs
- 65 mm hole spacing aligns with common door prep
- 360° rotating arc ring gives smooth keyless operation
- Bronze electroplated finish resists rust and fading
Recessed Pull for Sliding Doors
This recessed pull handle suits sliding doors and large drawers where a flush profile is preferred. The bronze finish matches traditional and modern hardware schemes. Installation uses an open-hole cutout with the supplied self-tapping screws. No key is required to operate the latch.
360° Rotating Pull Ring
The arc shaped pull ring rotates a full 360 degrees to engage or release the lock smoothly. Thickened construction resists deformation under repeated daily use. The solid latch provides stable engagement without a key cylinder. Electroplated brushed surfaces resist rust and fading over time.
Stainless Steel With Bronze Finish
The body combines stainless steel strength with a bronze electroplated brushed finish. Mounting holes measure 4.8 mm in diameter spaced 65 mm apart. Overall dimensions are 94 mm by 75 mm. Eight self-tapping screws are included for direct fastening into wood or composite door panels.
Highlights
- Concealed pull handle keeps surfaces flush
- 8 mm mount hole fits standard cut-outs
- 65 mm hole spacing aligns with common door prep
- 360° rotating arc ring gives smooth keyless operation
- Bronze electroplated finish resists rust and fading
Specifications
| Brand | Unique Bargains |
|---|---|
| Type | Door Knob Locksets |
Questions about this item
How much heat or noise does the recessed lock generate during daily use?
The lock is a passive mechanical device with no motor or electronics, so it produces no heat and no audible noise when the pull ring is turned.
What tools or door preparation are required before installing this lock?
A 4.8 mm drill bit for the mounting holes spaced 65 mm apart, plus a screwdriver for the eight self-tapping screws included in the pack.
Will the 94 mm by 75 mm faceplate work with my existing wooden sliding door?
Yes, the stainless-steel body with brushed bronze finish is designed for open-hole mounting on wooden, invisible or sliding doors using the supplied screws.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
