We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Translucent nylon PA6 tube, 6mm inner diameter, 8mm outer, 3.28ft coil

Unique-Bargains

Unique-Bargains Nylon PA6 Tubing 6mm ID x 8mm OD 3.28ft Translucent

SKU CH-HPHD-W6JHH

Translucent Nylon PA6 tubing, 3.28 ft long with 6 mm inner and 8 mm outer diameter, resists moisture absorption to stay flexible from -40 to 105 °C for air, water, fuel or chemical lines

  • Low moisture absorption keeps the tube flexible for longer service life
  • Nylon PA6 material delivers tensile strength above 60.0 MPa for durability
  • Operating range from -40 to 105 Celsius Degree suits varied environments
  • Compatible with push-to-connect and compression fittings for simple installation
  • Semi-rigid wall design enables higher flow rates and working pressure

Translucent Nylon PA6 Tubing

This translucent nylon PA6 tube has a 6 mm inner diameter and 8 mm outer diameter supplied in a 3.28 ft length. It is intended for fluid transfer in automotive, pneumatic and light-industrial systems where a semi-rigid, low-moisture line is required. The material remains flexible over a wide temperature range and works with standard push-to-connect or compression fittings. Buyers who need a different bore size or a reinforced hose for high-pressure hydraulic circuits will not be served by this product.

Sustained-load behaviour

Nylon PA6 absorbs very little moisture so the tube keeps its flexibility and dimensional stability during continuous service from -40 °C to 105 °C. Its tensile strength exceeds 60.0 MPa and bending strength reaches 90.0 MPa, while elongation stays above 30 % before rupture. Notched impact strength is greater than 5 kJ/m², indicating resistance to repeated mechanical shock. The melting point of 215-225 °C provides a wide margin above the rated operating ceiling.

Critical specification

The 6 mm ID by 8 mm OD geometry fixes the flow area and determines compatibility with existing fittings; no other dimension in the data sheet changes whether this tube fits the application.

Highlights

  • Low moisture absorption keeps the tube flexible for longer service life
  • Nylon PA6 material delivers tensile strength above 60.0 MPa for durability
  • Operating range from -40 to 105 Celsius Degree suits varied environments
  • Compatible with push-to-connect and compression fittings for simple installation
  • Semi-rigid wall design enables higher flow rates and working pressure

Specifications

BrandUnique Bargains

Questions about this item

Does the Nylon PA6 tubing soften or degrade when run continuously at high fluid temperatures?

The tubing is rated for an operating range of -40 to 105 Celsius Degree, so it will not soften during continuous use within that range.

Which fittings do I already need to connect the 6 mm ID x 8 mm OD tubing?

Standard push-to-connect fittings and compression fittings sized for 8 mm outside diameter work with this tubing.

Will the translucent PA6 tube stay flexible next to older rubber fuel lines that may leach plasticisers?

PA6 has very low moisture absorption, so it remains flexible and does not become brittle even when installed alongside older rubber lines.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.