Unique-Bargains
Unique-Bargains NBR Fuel Line Hose 5mm ID x 10mm OD 1M
NBR fuel hose with 5 mm ID, 10 mm OD and 2.5 mm wall handles diesel, petrol and oil from −20 °C to 80 °C
- NBR rubber resists oil, wear, ageing and ozone
- Operates from -20 °C to 80 °C for wide temperature range
- 5 mm ID and 10 mm OD fit standard fuel fittings
- 1 m length (3.28 ft) gives flexible routing options
- Soft, lightweight construction bends easily with minimal deformation
Fuel line hose for diesel and petrol
This NBR hose transports diesel, gasoline, lubricating oil and other mineral oils in automotive and industrial systems. The 1 metre length suits short runs between tank, filter and engine. It handles the fluids listed without swelling or cracking.
Push-on fit with standard clamps
The 5 mm inner diameter slides over common barbed fittings and is secured with worm-drive clips. No special tools or flaring are required. Take care not to kink the tube when routing tight bends, as the 2.5 mm wall can crease if forced.
Rated from -20 °C to 80 °C
The hose remains flexible in sub-zero conditions and resists softening up to 80 °C. It copes with typical fuel-system pressures but is not rated for high-pressure injection rails or hydraulic circuits. Continuous exposure near the upper limit will accelerate ageing.
Highlights
- NBR rubber resists oil, wear, ageing and ozone
- Operates from -20 °C to 80 °C for wide temperature range
- 5 mm ID and 10 mm OD fit standard fuel fittings
- 1 m length (3.28 ft) gives flexible routing options
- Soft, lightweight construction bends easily with minimal deformation
Specifications
| Brand | Unique Bargains |
|---|
Questions about this item
How can I confirm the hose is performing correctly after installation?
Check for leaks at connections while fuel flows; the NBR material should stay flexible and show no cracks or swelling within the -20 to 80 Celsius operating range.
What comes in the package and what must I supply myself?
The box contains one 1 metre length of 5 mm inner diameter by 10 mm outer diameter hose; you will need to provide compatible clamps or fittings for your fuel system.
Which hose size should I select for my application?
Choose this version when your system requires a 5 mm inner diameter and 10 mm outer diameter line; the 2.5 mm wall thickness and 1 metre length suit standard fuel, diesel or lubricating oil routing.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Taylor Made 12" x 18" Jolly Roger Novelty Flag 1818 marine electronic
- Accessories



