We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two small stainless steel MK8 nozzles with M6 threads and 1mm openings for 1.75mm filament

Unique-Bargains

Unique-Bargains MK8 Stainless Steel 1mm Nozzle 1.75mm Filament 2pcs

SKU CH-HXBP-D1E66

Stainless-steel MK8 nozzle with 1 mm outlet for 1.75 mm filament, supplied as a pair

  • Stainless steel resists wear from abrasive filaments
  • 1 mm nozzle diameter prints thicker layers faster
  • M6 thread fits MK8 extruders directly
  • Stamped size marking simplifies identification in storage
  • Pack of two nozzles provides a ready spare

1 mm MK8 Stainless-Steel Nozzle Pair

These two 1 mm stainless-steel nozzles fit MK8 extruder heads and accept 1.75 mm filament. They are intended for makers who want a wider extrusion path for faster prints or composite materials.

Check M6 Thread and 1.75 mm Filament Path

Your printer must use an M6 thread with a 5 mm thread length on the hot-end. The hot-end must also be designed for 1.75 mm filament; other diameters will not feed correctly.

Steady Extrusion at High Temperatures

Stainless steel handles the 180 to 280 °C range shown for PLA and ABS without softening. The consistent bore and clean threads maintain even flow during long prints rather than only during short test extrusions.

Highlights

  • Stainless steel resists wear from abrasive filaments
  • 1 mm nozzle diameter prints thicker layers faster
  • M6 thread fits MK8 extruders directly
  • Stamped size marking simplifies identification in storage
  • Pack of two nozzles provides a ready spare

Specifications

BrandUnique Bargains

Questions about this item

Does the pack include any tools or just the two stainless-steel MK8 nozzles?

The package contains only the two 1 mm nozzles; no spanner, socket driver or other tools are supplied.

Why would I choose the 1 mm stainless-steel version over a smaller brass nozzle?

A 1 mm bore extrudes wider lines for faster prints, and stainless steel resists wear from abrasive filaments better than brass.

What temperature range should I set when I swap to this 1 mm nozzle on my MK8 hot-end?

Heat the block to 180–220 °C for PLA or 240–280 °C for ABS before removing the old nozzle and fitting the new one.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.