We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Eighteen brass MK10 nozzles with stamped sizes from 0.2 to 1mm

Unique-Bargains

Unique-Bargains MK10 Brass Nozzle Kit 18pcs 0.2-1mm 1.75mm Filament

SKU CH-864B-5FQVB

Eighteen brass nozzles for MK10 printers using 1.75 mm filament, covering diameters from 0.2 mm to 1 mm

  • Compatible with MK10 printers using 1.75mm filament
  • Brass construction resists rust and erosion for long service life
  • 18-piece kit covers diameters from 0.2mm to 1mm for varied detail
  • Stamped size markings let you pick the right nozzle quickly
  • Clean M7 threads and consistent bore ensure reliable extrusion

18-Piece Brass Nozzle Kit for MK10

This kit supplies eighteen brass nozzles for MK10-style hot-ends that accept 1.75 mm filament. It covers diameters from 0.2 mm up to 1 mm so you can swap detail level or flow rate without changing hardware. The brass construction resists corrosion and suits non-abrasive materials such as PLA, ABS and PCL. Each nozzle is stamped with its size for quick identification.

Check thread and filament specs first

Your printer must use an M7 thread with a 5 mm thread length and a 4 mm input bore. The hot-end must be designed for 1.75 mm filament. Verify that your MK10-compatible block matches these dimensions before ordering. After installation you will need to re-level the nozzle-to-bed distance to restore print quality.

Brass build with size-stamped heads

Brass resists rust and erosion during extended use with standard filaments. The 13 mm by 9 mm body fits the MK10 form factor. Clean threads and consistent bore machining reduce the risk of clogs or leaks. The kit includes six 0.4 mm nozzles plus two each of 0.2, 0.3, 0.5, 0.6, 0.8 and 1 mm sizes.

Highlights

  • Compatible with MK10 printers using 1.75mm filament
  • Brass construction resists rust and erosion for long service life
  • 18-piece kit covers diameters from 0.2mm to 1mm for varied detail
  • Stamped size markings let you pick the right nozzle quickly
  • Clean M7 threads and consistent bore ensure reliable extrusion

Specifications

BrandUnique Bargains

Questions about this item

What nozzles are in the 18-piece kit and do I need any extra tools?

The kit contains two each of 0.2, 0.3, 0.5, 0.6, 0.8 and 1 mm brass nozzles plus six 0.4 mm nozzles. A spanner for the heat block and a socket screwdriver are required for fitting but are not included.

Which nozzle diameter should I pick for everyday PLA printing?

The 0.4 mm nozzle is supplied in the largest quantity (six pieces) and is the standard choice for general-purpose PLA, ABS or PCL printing.

What difference will a 0.2 mm nozzle make to my prints compared with the 0.4 mm?

A 0.2 mm nozzle extrudes a finer line for higher detail but prints more slowly and clogs more easily; the 0.4 mm nozzle gives faster, more reliable prints with less detail.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.