We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ten silver micro USB female SMD jacks on a strip

Unique-Bargains

Unique-Bargains Micro USB Female SMD PCB Mount Jack 10pcs Silver Tone

SKU CH-FC9P-Y5TD0

Pack of ten micro-USB female SMD PCB-mount jacks for board-level USB connections

  • TypeHI - Conduit & Fittings
  • Silver Tone finish resists corrosion on every jack
  • SMD footprint fits dense PCB layouts directly
  • Ten pieces per pack support multiple builds
  • 3 g total weight keeps assemblies light
  • 7 x 5 x 2 mm size suits compact device sockets

Micro USB SMD PCB Jack

This pack supplies ten surface-mount Micro USB female connectors for printed-circuit-board assembly. The silver-tone metal shells suit repair work, prototype builds or small-batch production where a compact USB interface is required. Each jack measures 7 x 5 x 2 mm and weighs roughly 0.3 grams. The components arrive new and ready for hand or reflow soldering.

Thermal noise and power profile

As passive interconnects the jacks generate no heat and draw no power of their own. They add no audible noise to a design because they contain no moving parts or active circuitry. Thermal performance depends entirely on the surrounding board layout and the current carried by the connected device. Designers should verify voltage-drop limits for their specific application.

Build quality and mounting implications

The metal housing provides mechanical strength for repeated insertion cycles while the SMD footprint keeps board height low. Ten pieces per pack support multiple assembly runs or spares for rework. The small outline fits dense layouts but requires precise solder-paste placement and inspection to avoid bridging. No through-hole anchors are present so pad design must resist insertion force.

Highlights

  • Silver Tone finish resists corrosion on every jack
  • SMD footprint fits dense PCB layouts directly
  • Ten pieces per pack support multiple builds
  • 3 g total weight keeps assemblies light
  • 7 x 5 x 2 mm size suits compact device sockets

Specifications

BrandUnique Bargains
TypeHI - Conduit & Fittings

Questions about this item

How do I solder the 7 x 5 x 2 mm Micro USB jack onto my PCB without bridging the tiny SMD pads?

Apply a thin layer of flux to each pad, align the jack using the four corner anchors, then tack one corner pin with a fine-tip iron before soldering the remaining data and power pins individually.

Will the silver-tone plating on the 10-piece pack wear out after repeated cable insertions?

The metal shell and contacts are plated for corrosion resistance; normal insertion cycles will not strip the finish, but avoid excessive side force which can bend the SMD mounting tabs.

At what point does the 3 g jack become the thermal bottleneck during sustained data transfer?

The connector body itself does not generate heat; any temperature rise comes from the PCB traces or controller, so the jack is never the first thermal limit under load.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.