We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four black chrome-plated brass G1/4 straight extender fittings with silicone seals

Unique-Bargains

Unique-Bargains Male to Female Extender Fitting G1/4 10mm Black 4pcs

SKU CH-VZGE-9FPM0

Straight G1/4 extender adds 10 mm length with brass chrome-plated body, 18 mm OD and silicone seal for water-cooling loops

  • Extends tubing reach by 10 mm with G1/4 straight threads
  • Brass body plated in chrome resists corrosion and aids heat transfer
  • Silicone sealing ring provides a leak-free connection under pressure
  • Polished finish gives a clean look inside the loop
  • Pack includes four identical extenders for multi-port builds

G1/4 Extender Fittings for Water Cooling

These brass fittings extend the thread depth in a custom liquid-cooling loop by 10 mm. They suit builders who need extra clearance between a block, radiator or reservoir and the connecting tubing.

G1/4 Thread Limits in Custom Loops

The G1/4 parallel thread is the de-facto standard for PC water-cooling components, but it provides no mechanical stop; sealing relies entirely on the included silicone ring. Over-tightening can strip the soft brass or crush the ring, so hand-tight plus a quarter turn is the practical limit.

10 mm Body Length Decides Fit

The 10 mm male-thread length determines whether the extender clears a recessed port or fouls a neighbouring fitting. Measure the port depth before ordering; if the recess is shallower or deeper than 10 mm, a different spacer length is required.

Highlights

  • Extends tubing reach by 10 mm with G1/4 straight threads
  • Brass body plated in chrome resists corrosion and aids heat transfer
  • Silicone sealing ring provides a leak-free connection under pressure
  • Polished finish gives a clean look inside the loop
  • Pack includes four identical extenders for multi-port builds

Specifications

BrandUnique Bargains

Questions about this item

Should I choose the 10 mm or 15 mm length version?

Each fitting has a 10 mm threaded section and an 18 mm outside diameter; the overall length is 15 mm. All four pieces in the pack are identical.

What does the 10 mm thread length mean once installed in a water-cooling loop?

The 10 mm male thread engages the female G1/4 port, while the female end accepts another G1/4 component, effectively spacing the connection by the fitting's 15 mm overall length.

Which thread standard do these G1/4 fittings follow, and what does it limit?

They use the G1/4 parallel thread common in PC water cooling, so they seal with the included silicone ring against any standard G1/4 port but will not mate with NPT or metric threads.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.