Unique-Bargains
Unique-Bargains K-Type Thermocouple Probe -50-200°C 90cm 2-Pack
A two-pack of K-type thermocouple probes with 90 cm cables, fork terminals spaced 5 mm apart and a -50 to 200 °C range for digital thermometers
- TypeHI - Portable Heaters
- Measures from -50 °C to 200 °C for wide temperature coverage
- 90 cm cable gives flexible placement in tight spaces
- Two probes included for simultaneous readings at different points
- 5 mm fork terminals connect directly to K-type digital thermometers
- Weighs 30 g for lightweight, portable use
K-Type Probe Pair for Digital Thermometers
This pack contains two K-type thermocouple probes built for digital thermometers that accept a miniature K-type connector. Each probe measures from minus fifty to two hundred degrees Celsius and ends in fork terminals spaced five millimetres apart.
Replaces Worn or Single Sensors
The jump is worth it when an existing probe has cracked insulation, corroded terminals or drifted out of calibration, leaving the meter reading inaccurately. A second probe also lets you monitor two points at once without swapping leads.
Plug-In Fork Terminals, Watch Polarity
Installation is a simple push of the fork terminals into the meter’s input jacks, but the terminals must match the meter’s polarity markings or the reading will be reversed. The ninety-centimetre cable reaches most bench or tank setups, yet the lightweight thirty-gram construction offers no strain relief, so sharp bends at the connector can fatigue the wires over time.
Highlights
- Measures from -50 °C to 200 °C for wide temperature coverage
- 90 cm cable gives flexible placement in tight spaces
- Two probes included for simultaneous readings at different points
- 5 mm fork terminals connect directly to K-type digital thermometers
- Weighs 30 g for lightweight, portable use
Specifications
| Brand | Unique Bargains |
|---|---|
| Type | HI - Portable Heaters |
Questions about this item
What is the fork terminal spacing on these K-type probes?
The fork terminals are spaced 5 mm or 0.197 inches apart, matching standard K-type inputs on compatible digital thermometers.
How do I connect the 90 cm cable to my meter without damaging the plug?
Align the miniature K-type connector with the meter socket and press straight in; forcing it at an angle can bend the pins.
When should I replace the probes if I use them up to 200 °C?
Replace them when readings drift or the white insulation shows cracking, as prolonged high-temperature exposure degrades the thermocouple junction over time.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



