We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver aluminium flexible shaft coupling 17mm bore 65mm long 45mm diameter

Unique-Bargains

Unique-Bargains Flexible Shaft Coupling 17mm to 17mm Bore L65xD45

SKU CH-FP4C-NZ0K1

Connects two 17 mm shafts with a 65 mm long, 45 mm diameter aluminium clamp coupling that absorbs vibration

  • Size/Dimensions65 x 45mm / 2.56 inch x 1.77 inch (L*D)
  • Connects two 17 mm shafts for direct servo-motor drive
  • Clamp fixing with M6 screws secures shafts without keyways
  • Aluminium-alloy body resists wear while keeping mass to 216 g
  • Flexible element absorbs vibration and handles high torque loads
  • Compact 65 mm length by 45 mm diameter fits tight machine spaces

17 mm aluminium flexible shaft coupling

This aluminium-alloy flexible shaft coupling joins two 17 mm shafts with a 65 mm overall length and 45 mm outside diameter. It uses a clamp-type M6 fastening for secure attachment and weighs 216 g. The component is designed for servo motors, spindle drives and stepper motors where vibration absorption and torque transmission are required.

Clamp installation with M6 hardware

The coupling installs by tightening the integral clamp screws against each 17 mm shaft, requiring only standard hex tools. Ensure both shafts are clean, free of burrs and aligned within the coupling’s flexible element limits to avoid premature wear. Over-tightening the M6 screws can distort the aluminium hub, while excessive misalignment will reduce the elastic torque capacity and increase vibration.

Verify shaft diameter and space envelope

Confirm that both shafts measure exactly 17 mm and that the 65 mm by 45 mm envelope fits within your machine layout. Check that the clamp-style connection matches your torque and speed requirements, as the supplier specifies aluminium alloy construction with a silver-tone finish. No additional hardware beyond the supplied coupler is included.

Highlights

  • Connects two 17 mm shafts for direct servo-motor drive
  • Clamp fixing with M6 screws secures shafts without keyways
  • Aluminium-alloy body resists wear while keeping mass to 216 g
  • Flexible element absorbs vibration and handles high torque loads
  • Compact 65 mm length by 45 mm diameter fits tight machine spaces

Specifications

Size/Dimensions65 x 45mm / 2.56 inch x 1.77 inch (L*D)
BrandUnique Bargains

Questions about this item

How can I verify the 17 mm bore coupling is transmitting torque without vibration after installation?

Run the servo or stepper motor at operating speed and listen for unusual noise; the aluminum-alloy flexible element is designed to absorb vibration so smooth, quiet rotation indicates it is working as intended.

What components are included in the package and what additional hardware is required?

The box contains one flexible shaft coupler weighing 216 g; you will need to supply two M6 clamp screws and ensure both shafts are 17 mm diameter.

Which bore combination should I select for a 17 mm motor shaft and a 17 mm driven shaft?

This model is a single 17 mm to 17 mm version with 65 mm length and 45 mm outside diameter, so it matches identical 17 mm shafts directly.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.