We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ten black plastic dual-row connectors with metal pins in a row

Unique-Bargains

Unique-Bargains FC-30P 30Pin 2.54mm Pitch ISP JTAG Socket Conduit 10Pcs

SKU CH-Y52Y-F6Y4C

Pack of ten 30-pin ISP JTAG socket connectors with 2.54 mm pitch for flat ribbon cable

  • TypeHI - Conduit & Fittings
  • 10-piece pack gives plenty of sockets for multiple projects
  • 30-pin, 2.54 mm pitch matches standard flat ribbon cable layouts
  • Dual-row plastic-and-metal housing measures 43 x 14 x 7 mm for compact board fit
  • ISP/JTAG programming interface ready for in-circuit debugging and flashing

30-Pin JTAG Socket Connector Pack

This pack contains ten FC-30P connectors designed for ISP JTAG programming with flat ribbon cable. Each unit features a 2.54 mm pitch across two rows of thirty pins. The plastic and metal housing suits hobbyists and engineers building or debugging embedded hardware.

Thermal and Power Characteristics

As passive components these connectors generate no heat and produce no audible noise during operation. Power draw is limited to the signals passing through the pins and depends entirely on the attached circuitry. No active cooling or additional power budget is required.

Highlights

  • 10-piece pack gives plenty of sockets for multiple projects
  • 30-pin, 2.54 mm pitch matches standard flat ribbon cable layouts
  • Dual-row plastic-and-metal housing measures 43 x 14 x 7 mm for compact board fit
  • ISP/JTAG programming interface ready for in-circuit debugging and flashing

Specifications

BrandUnique Bargains
TypeHI - Conduit & Fittings

Questions about this item

How do I install the 30-pin 2.54mm pitch JTAG socket onto a flat ribbon cable?

Align the 2.54mm pitch pins with the cable conductors, press the 30-pin connector firmly until the insulation-displacement contacts seat fully, then verify all 30 pins show continuity before powering the board.

What maintenance or replacement will the 30-pin JTAG socket need over time?

Inspect the plastic housing and metal contacts for cracking or corrosion after repeated mating cycles; replace the socket if any of the 30 pins show bent tips, oxidised surfaces or intermittent continuity.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.