Unique-Bargains
Unique-Bargains DC Power Extension Cord 5.5mm x 2.5mm 4A 18AWG 30cm 2pcs
Two 30 cm DC power extension cords with 5.5 mm × 2.5 mm plugs, 18 AWG pure copper conductors rated for 4 A
- TypePower
- Extends reach with two 30 cm DC cables
- 5 mm × 2.5 mm barrel fits compatible devices
- 18 AWG pure copper cores handle 4 A current
- 4 mm jacket protects conductors during routing
- Pair of pigtails simplifies LED or monitor power connections
Two-pack 5.5 mm × 2.5 mm DC extension
This two-pack provides a pair of 30 cm DC power extension cords with 5.5 mm outer and 2.5 mm inner barrel connectors. Each cord uses 18 AWG pure copper conductors rated for 4 A. The female plug pigtail design lets you extend existing power leads on monitors, LED strips, CCTV cameras or similar low-voltage equipment.
Suitable for fixed low-voltage installs
Installers who need a short, ready-made extension between a power supply and a device with a matching 5.5 × 2.5 mm jack will find these convenient. Builders who require a different barrel size, a higher current rating, a longer reach or a locking connector should look at alternative cable assemblies.
30 cm length with 5.5 × 2.5 mm barrel
The 30 cm length and 5.5 mm by 2.5 mm barrel dimensions are the critical specifications that determine whether this cord fits the target device and reaches the power source without excess slack.
Highlights
- Extends reach with two 30 cm DC cables
- 5 mm × 2.5 mm barrel fits compatible devices
- 18 AWG pure copper cores handle 4 A current
- 4 mm jacket protects conductors during routing
- Pair of pigtails simplifies LED or monitor power connections
Specifications
| Brand | Unique Bargains |
|---|---|
| Type | Power |
Questions about this item
What current does the 5.5 mm × 2.5 mm barrel connector support?
The cable is rated for 4 A through its 5.5 mm × 2.5 mm DC plug, matching the 18 AWG copper conductors.
What clearance does the 4 mm outer-diameter cable need for routing?
At 4 mm overall diameter the pigtail fits through standard grommets and cable channels without extra drilling.
How do I avoid reversed polarity when soldering the 30 cm leads?
Identify the centre-positive barrel tip, then match the striped or marked conductor to positive before soldering.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



