Unique-Bargains
Unique-Bargains DC Power 3.5mm x 1.35mm 1A 30cm Barrel Male Plug Pigtail 3pcs
Three 30 cm pigtail cables with 3.5 mm × 1.35 mm barrel male plugs, rated 1 A, for LED or monitoring equipment power connections
- TypePower
- 30 cm length gives flexible reach for tight installs
- 5 mm × 1.35 mm barrel fits compatible DC jacks
- Pure copper 12 × 0.12 mm core ensures strong conductivity
- 1 A rating supports LED strips and monitoring gear
- Three pigtails per pack provide spare connectors
3.5 mm × 1.35 mm DC pigtail trio
This set contains three 30 cm barrel plug pigtails with a 3.5 mm outer diameter and 1.35 mm centre pin. Each lead uses a 12-strand, 0.12 mm pure copper core rated for 1 A continuous current. The cables are intended for low-power DC connections such as LED lighting or monitoring equipment.
Suitable for hobbyists
Builders who require higher amperage, a different barrel size, or longer cable runs should look at other options. The fixed 30 cm length and 1 A rating limit use to small loads and tight spaces.
Pure copper core maintains steady conductivity
The 12 × 0.12 mm conductor resists voltage drop during continuous 1 A operation better than thinner or copper-clad alternatives. Heat stays low over the full 30 cm length, so the pigtail remains reliable in enclosed LED or monitoring installations.
Highlights
- 30 cm length gives flexible reach for tight installs
- 5 mm × 1.35 mm barrel fits compatible DC jacks
- Pure copper 12 × 0.12 mm core ensures strong conductivity
- 1 A rating supports LED strips and monitoring gear
- Three pigtails per pack provide spare connectors
Specifications
| Brand | Unique Bargains |
|---|---|
| Type | Power |
Questions about this item
What power source must I already have to use these 3.5 mm × 1.35 mm barrel male plugs?
You need a DC power supply or device that provides a matching 3.5 mm × 1.35 mm female barrel jack and can deliver up to 1 A.
Will the 30 cm pigtails reach from my existing power brick to the equipment if the brick’s cable is short?
Each pigtail adds 30 cm (11.81 in) of pure-copper 12×0.12 mm core cable with a 3.5 mm outer diameter, extending the connection by that length.
How can I confirm the pigtails are conducting correctly after I solder or crimp them?
With power applied, measure continuity across the 3.5 mm × 1.35 mm plug and verify the connected equipment powers on without voltage drop at the rated 1 A.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



