Unique-Bargains
Unique-Bargains DC-017 5.5mmx2.0mm DC Power Jack Socket 3 Pin Female Panel Mount Connector 5pcs
Pack of five 5.5 mm × 2.0 mm DC power jack sockets with three solder pins for panel mounting
- TypeCable Connectors
- 5-piece pack keeps spares on hand for quick repairs
- 3-pin solder terminals simplify panel mounting
- 5 mm x 2.0 mm barrel fits common DC jacks
- Rated for 0.5 A at 30 V DC for low-power devices
- Compact 17.5 x 20 x 9 mm body suits tight enclosures
5.5 mm × 2.0 mm DC Power Jack
This pack supplies five female panel-mount sockets rated at 0.5 A and 30 V DC. Each unit accepts a 5.5 mm outer diameter and 2.0 mm inner diameter plug, making it a direct replacement for worn jacks on portable audio, video and security devices.
Three-pin solder terminals and panel mount
The three pins are spaced for through-hole soldering and the 6.3 mm socket diameter fits standard panel cut-outs. Copper, metal and plastic construction resists heat during installation and provides a firm mechanical hold once the connector is seated in the chassis.
Verify plug dimensions and panel cut-out
Confirm that your existing power plug measures 5.5 mm by 2.0 mm and that the enclosure can accommodate a 6.3 mm mounting hole with 17.5 mm depth. The connector is not suited for higher current loads or plug sizes outside the stated specification.
Highlights
- 5-piece pack keeps spares on hand for quick repairs
- 3-pin solder terminals simplify panel mounting
- 5 mm x 2.0 mm barrel fits common DC jacks
- Rated for 0.5 A at 30 V DC for low-power devices
- Compact 17.5 x 20 x 9 mm body suits tight enclosures
Specifications
| Brand | Unique Bargains |
|---|---|
| Type | Cable Connectors |
Questions about this item
What voltage and current does the 5.5 mm x 2.0 mm DC jack handle?
The socket is rated for 30 V DC at 0.5 A, so it will carry up to 0.5 A at 30 V without overheating.
What panel cut-out diameter does the DC-017 need for panel mounting?
The socket body is 6.3 mm in diameter, so a 6.3 mm round hole is required for a snug panel fit.
How are the three pins soldered, and which step do people often miss?
The three pins are through-hole solder terminals; the step often missed is tinning each pin and the PCB pad before inserting the jack to ensure a solid joint.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Unique-Bargains XS12JK-3 3P 12mm Round Socket Male Female Aviation Connector
- Electrical Wire Con…



