We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Five black horizontal PCB coin-cell holders for CR2450 and CR2430 batteries

Unique-Bargains

Unique-Bargains CR2450 CR2430 Horizontal Battery Holder Black 5 Pcs

SKU CH-YVSE-TFG2E

Horizontal PCB holder fits single CR2450 or CR2430 cells, 29 × 9.4 mm, 16 g, black plastic and metal, pack of five

  • TypeBattery & Cable Connectors
  • Holds CR2450 and CR2430 cells securely
  • Horizontal PCB layout saves board space
  • Compact 29 mm by 9.4 mm footprint
  • Lightweight 16 g pack of five holders
  • Battery not included — ready for your cells

CR2450 CR2430 Horizontal Battery Holder 5 Pack

This pack contains five black horizontal holders designed for single CR2450 or CR2430 button cells. Each unit uses a PCB mount style with plastic and metal construction. They suit hobbyists, repair technicians or engineers building compact devices that need a secure 3 V coin cell connection.

Simple PCB soldering with polarity care

The holders mount horizontally on a circuit board using through-hole pins. Installation requires basic soldering equipment and attention to the marked polarity so the cell inserts correctly. The main issue is applying too much heat, which can deform the plastic body or weaken the metal contacts.

Verify cell size and board layout first

Confirm your application uses CR2450 or CR2430 cells, as other diameters will not fit the 29 x 9.4 mm footprint. Check the PCB pad spacing matches the holder pin pitch before ordering. Note that batteries are not supplied with this pack.

Highlights

  • Holds CR2450 and CR2430 cells securely
  • Horizontal PCB layout saves board space
  • Compact 29 mm by 9.4 mm footprint
  • Lightweight 16 g pack of five holders
  • Battery not included — ready for your cells

Specifications

BrandUnique Bargains
TypeBattery & Cable Connectors

Questions about this item

How can I confirm the holder is seated correctly on the PCB after soldering?

The 29 x 9.4 mm body should sit flush on the board with the CR2450 or CR2430 cell clicking into the horizontal cradle and the 3 V output present at the terminals.

What comes in the package and what must I supply myself?

Five black plastic-and-metal horizontal holders are included; the CR2450 or CR2430 button cells are not included and must be purchased separately.

Which battery size should I choose for the 1.14 inch diameter footprint?

Both CR2450 and CR2430 fit the same 29 mm diameter holder, so select the cell that matches your device’s original battery code.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.