We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two black vertical CR2032 battery sockets with three metal pins

Unique-Bargains

Unique-Bargains CR2032 Coin Cell Battery Socket Holder 2pcs

SKU CH-WJ72-TPJW0

Vertical three-pin DIP socket holds one CR2032 coin cell per unit, supplied as a pair

  • Battery TypeRechargeable Batteries
  • Vertical DIP mount fits CR2032 cells securely
  • Three-pin layout gives stable PCB connection
  • Black plastic and metal body measures 23 x 6 mm
  • Pin spacing of 9 mm and 5.5 mm suits standard layouts
  • Pack includes two holders for dual-battery designs

CR2032 Battery Socket Holder

This pack contains two black vertical DIP-mount holders designed for a single CR2032 coin cell. The plastic and metal body measures 23 by 6 millimetres with a 20 millimetre inner diameter and suits hobbyists or repair technicians adding battery backup to a PCB.

Suits through-hole prototyping

Builders laying out a board with 5.5 millimetre or 9 millimetre pin spacing can use these sockets directly. Projects that require surface-mount footprints, horizontal orientation or a different cell size will need an alternative holder.

Simple solder-in installation

The three terminals insert into standard plated through-holes and are soldered on the reverse side. Take care to align the 0.35 inch pin spacing with your layout; the battery itself is not included so remember to source a CR2032 cell separately.

Highlights

  • Vertical DIP mount fits CR2032 cells securely
  • Three-pin layout gives stable PCB connection
  • Black plastic and metal body measures 23 x 6 mm
  • Pin spacing of 9 mm and 5.5 mm suits standard layouts
  • Pack includes two holders for dual-battery designs

Specifications

BrandUnique Bargains
Battery TypeRechargeable Batteries

Questions about this item

Will the 9 mm and 5.5 mm pin spacing on this 3-terminal DIP socket match the holes on my existing PCB?

The holder has two pin distances of 9 mm and 5.5 mm; measure your board's hole pattern to confirm it aligns with these spacings before soldering.

Can I reuse the same CR2032 cells I already own with these new holders?

Yes, the inner diameter is 20 mm, which fits any standard CR2032 coin cell you already have; the battery is not included in the package.

How can I verify the socket is making good contact after I solder it in place?

Insert a CR2032 cell, then measure voltage across the three terminals with a multimeter; a steady 3 V reading confirms the holder is working as intended.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.